John Deere 70C
The John Deere 70C is a tractor produced by John Deere. It is equipped with a 181.2 ci 3.0 L engine. The listed engine power is Diesel (gross): 70 hp / 52.2 kW. Transmission: 8 forward and reverse. Operating weight: 4519 lbs 2049 kg.
Engine Power
Diesel (gross): 70 hp / 52.2 kW
Fuel & Capacities
13.2 gal
50.0 L
Transmission
8 forward and reverse
Operating Weight
4519 lbs
2049 kg
Overview
 | 2005 - 2015
Milenio C SeriesCompact Utility tractorGoldini built
Milenio C Series
Compact Utility tractor
Goldini built |
|---|
Production | |
|---|---|
Distributor | John Deere |
Manufacturer | Goldini |
Compact Utility tractor | |
Built in Italy | |
John Deere 70C Engine | |
|---|---|
VM Motori 3.0L 4-cyl diesel | |
Fuel tank | 13.2 gal
50.0 L |
Engine details ...  | |
John Deere 70C Power | |
|---|---|
Engine (gross) | 70 hp
52.2 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Mechanical wet disc brakes | |
Two-post mid-mount folding ROPS. Cab optional. |
Hydraulics | |
|---|---|
Pressure | 2611 psi
180.0 bar |
Pump flow | 10.3 gpm
39.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Rear lift (at ends) | 5071 lbs
2300 kg |
Rear lift (at 24"/610mm) | 3197 lbs
1450 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E |
Engine RPM | 540@2430 |
540E@1874 | |
Dimensions & Tires | |
|---|---|
Weight | 4519 lbs
2049 kg |
Front tire | 260/70R14 |
Rear tire | 360/70R24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 55 |
Battery volts | 12 |
Engine
Engine Detail — 181.2 ci / 3.0 L Diesel
Manufacturer | VM Motori D754 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 181.2 ci
3.0 L |
Bore/Stroke | 3.70x4.21 inches
94 x 107 mm |
Rated Power (gross) | 70 hp
52.2 kW |
Fuel system | direct injection |
Air cleaner | dry |
Rated RPM | 2600 |
Torque | 155.6 lb-ft
211.0 Nm |
Torque RPM | 1400 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 5.3 qts
5.0 L |
Coolant capacity | 9.5 qts
9.0 L |
Transmission
Transmission options | |
|---|---|
16-speed | |
8-speed |
Transmission — 16 forward and 8 reverse
Gears | 16 forward and 8 reverse |
Clutch | mechanical dry disc |
Oil capacity | 37 qts
35.0 L |
Transmission — 8 forward and reverse
Gears | 8 forward and reverse |
Dimensions
John Deere 70C Tires | |
|---|---|
Standard tires (ag) | Front: 260/70R14. Rear: 360/70R24 |
Dimensions | |
|---|---|
Weight | 4519 lbs
2049 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 70C based on its 70 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 70C.
Estimated Continuous Field Runtime: 3.6 hrs
Approximately 3.6 hours of continuous field operation at ~75% rated power on a full tank (13.2 gal / 50 L).
Estimated 75% Load Fuel Burn~3.6 gal/hr (13.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 70C Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 70C.
Converted Equivalents:
Horsepower (HP)70 hp
Kilowatts (kW)52.2 kW
Metric Horsepower (PS / CV)71 PS
Direct Competitor Comparison
Compare John Deere 70C against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 70C
Engine Power:Diesel (gross): 70 hp / 52.2 kW
★ Baseline Reference
Related models
John Deere 1846F
- Power:
- 56
- Production years:
- 1996 - 2003
John Deere 5203
- Power:
- 56
- Production years:
- 2003 - 2008
John Deere 5205
- Power:
- 56
- Production years:
- 2000 - 2007
John Deere 5215
- Power:
- 56
- Production years:
- 2003 - 2008
John Deere 5225
- Power:
- 56
- Production years:
- 2005 - 2008