John Deere 710
The John Deere 710 is a tractor produced by John Deere. It is equipped with a 202.6 ci 3.3 L engine. The listed engine power is Diesel (listed): 50 hp / 37.3 kW. Transmission: 10 forward and 3 reverse. Operating weight: 5060 lbs 2295 kg.
Engine Power
Diesel (listed): 50 hp / 37.3 kW
Fuel & Capacities
18.5 gal
70.0 L
Transmission
10 forward and 3 reverse
Operating Weight
5060 lbs
2295 kg
Overview
 | 1966 - 1967
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | John Deere |
Utility tractor | |
Built in Mannheim, Baden-Württemberg, Germany | |
John Deere 710 Engine | |
|---|---|
John Deere 3.3L 4-cyl diesel | |
Fuel tank | 18.5 gal
70.0 L |
Engine details ...  | |
John Deere 710 Transmission | |
|---|---|
10-speed | |
Transmission details ...  |
John Deere 710 Power | |
|---|---|
Engine | 50 hp
37.3 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Open operator station. |
Hydraulics | |
|---|---|
Pump flow | 4.2 gpm
15.9 lpm |
8.5 gpm (power steering)
32.2 lpm | |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 3859 lbs
1750 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | live (2-stage clutch) |
Rear PTO Type | 540/1000 |
Engine RPM | 540@2250 |
1000@2380 | |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Weight | 5060 lbs
2295 kg |
Front tire | 6.50-16 |
Rear tire | 16.9-30 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 202.6 ci / 3.3 L Diesel
Manufacturer | John Deere 202D23L |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Wet-sleeved engine built in France. | |
Displacement | 202.6 ci
3.3 L |
Bore/Stroke | 3.858x4.33 inches
98 x 110 mm |
Power | 50 hp
37.3 kW |
Rated RPM | 2400 |
Idle RPM | 650-2400 |
Operating RPM | 1500-2400 |
Torque | 132 lb-ft
179.0 Nm |
Torque RPM | 1300 |
Firing order | 1-3-4-2 |
Transmission
Transmission — 10 forward and 3 reverse
Gears | 10 forward and 3 reverse |
Three gears (1-3) in three ranges (I-III), plus reverse (R) range with additional fourth road gear in range III. | |
With 14-30 rear tires. | |
 | |
Dimensions
John Deere 710 Tires | |
|---|---|
Ag front | 6.50-16 |
Ag rear | 16.9-30 |
Dimensions | |
|---|---|
Length | 139 inches
353 cm |
Height | 94.5 inches
240 cm |
Weight | 5060 lbs
2295 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 710 based on its 50 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 710.
Estimated Continuous Field Runtime: 7.1 hrs
Approximately 7.1 hours of continuous field operation at ~75% rated power on a full tank (18.5 gal / 70 L).
Estimated 75% Load Fuel Burn~2.6 gal/hr (9.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 710 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 710.
Converted Equivalents:
Horsepower (HP)50 hp
Kilowatts (kW)37.3 kW
Metric Horsepower (PS / CV)50.7 PS
Direct Competitor Comparison
Compare John Deere 710 against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 710
Engine Power:Diesel (listed): 50 hp / 37.3 kW
★ Baseline Reference
Related models
John Deere 1010
- Power:
- 40.1
- Production years:
- 1960 - 1965
John Deere 930VU
- Power:
- 40.2
- Production years:
- 1974 - 1979
John Deere 990
- Power:
- 40.4
- Production years:
- 2000 - 2007
John Deere 4105
- Power:
- 41
- Production years:
- 2008 - 2014
John Deere 5041C
- Power:
- 41
- Production years:
- 2011 - 2014