John Deere 8270R

The John Deere 8270R is a tractor produced by John Deere. It is equipped with a 548 ci 9.0 L engine. The listed engine power is Diesel (gross): 270 hp / 201.3 kW. Transmission: John Deere AutoPowr. Operating weight: 27553 to 32691 pounds.

Engine Power
Diesel (gross): 270 hp / 201.3 kW
Fuel & Capacities
170.4 gal 645.0 L
Transmission
John Deere AutoPowr
Operating Weight
27553 to 32691 pounds

Overview

John Deere 8270R tractor photo
2014 - 2019 8R SeriesRow-Crop tractor 8R Series Row-Crop tractor
Production
Manufacturer
John Deere
Row-Crop tractor
Built in Waterloo, Iowa, USA
John Deere 8270R Engine
John Deere 9.0L 6-cyl diesel
Engine details ...
John Deere 8270R Power
Engine (gross)
270 hp 201.3 kW
Engine (max)
297 hp 221.5 kW
PTO (claimed)
225 hp 167.8 kW
150 hp (front) 111.9 kW
Drawbar (tested)
217.51 hp 162.2 kW
PTO (tested)
268.62 hp 200.3 kW
Performance test details ...
Mechanical
Four-wheel drive
Final drives
inboard planetary
Differential lock
hydraulic rear standard
hydraulic front with 1500 and ILS axles
Steering
hydrostatic power
Active Command steering OptOptional
Hydraulic wet disc brakes
Trailer brakes
hydraulic OptOptional
dual line air OptOptional
CommandView III cab standard with air-conditioning. AutoTrac ready; JDLink; ServiceADVISOR Remote
Capacity
Fuel
170.4 gal 645.0 L
181.2 gal (G49 chassis) 685.8 L
Exhaust fluid (DEF)
6.8 gal 25.7 L
Hydraulic system
10.6 gal 40.1 L
23.8 gal (optional) 90.1 L
Hydraulics
Type
closed-center load sensing pressure flow compensated
Capacity
10.6 gal 40.1 L
23.8 gal (optional) 90.1 L
Rear valves
4 to 6
Front valves
0 to 2
Pump flow
60 gpm 227.1 lpm
85 gpm (optional) 321.7 lpm
SCV flow
35 gpm 132.5 lpm
42 gpm (optional) 159.0 lpm
Tractor hitch
Rear Type
III/IIIN
IVN/III
Rear lift
14000 lbs 6350 kg
18500 lbs (optional) 8391 kg
20000 lbs (IVN) 9072 kg
Rear Arms
hydraulic center link optional
Front Hitch
optional
Front lift (at ends)
11450 lbs 5193 kg
Drawbar
Cat 3
Cat 4 optional
Cat 4 Heavy-Duty optional
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
1000 (1.75)
1000/1000E (1.75 optional)
540/1000 (1.375 optional)
Front PTO
optional independent
Front PTO Type
1000 (1.75)
1000 (1.375)
Dimensions & Tires
Wheelbase
121.3 inches (1300) 308 cm
120.1 inches (1500/ILS) 305 cm
Weight
27553 to 32691 pounds
Front tire
380/80R38
Rear tire
480/80R50
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
240
Batteries
2
Battery CCA
925 (each)
Battery volts
12

Engine

Engine Detail — 548 ci / 9.0 L Diesel

Manufacturer
John Deere PowerTech PSS
Configuration
turbocharged aftercooled diesel, 6-cylinder, liquid-cooled
Displacement
548 ci 9.0 L
Bore/Stroke
4.66x5.35 inches 118 x 136 mm
Emissions
Tier 4B
Emission control
selective catalyst reduction
Rated Power (gross)
270 hp 201.3 kW
Maximum Power (gross)
297 hp 221.5 kW
Fuel system
electronic high-pressure common rail
Compression
16:1
Rated RPM
2100
Starter
electric
Starter volts
12

Transmission

Transmission options
16-speed full power shift
infinitely variable transmission (IVT)

Transmission — John Deere PowerShift

Transmission
John Deere PowerShift
Type
full power shift
Gears
16 forward and 4 reverse

Transmission — John Deere AutoPowr

Transmission
John Deere AutoPowr
Type
infinitely variable transmission (IVT)
Gears
infinite forward and reverse

Dimensions

John Deere 8270R Tires
Standard tires (ag)
Front: 380/80R38. Rear: 480/80R50
Dimensions
Wheelbase
121.3 inches (1300) 308 cm
120.1 inches (1500/ILS) 305 cm
Length
245 inches 622 cm
259.5 inches (with front weights) 659 cm
Width
137.3 inches (warning lamps) 348 cm
175.1 inches (triples warning lamps) 444 cm
Height (cab)
129.3 inches 328 cm
Clearance (front axle)
23.9 inches*1300 axle Group 42 tires 60 cm
23.1 inches*1500 axle Group 42 tires 58 cm
19.7 inches*ILS axle Group 42 tires 50 cm
Clearance (rear axle)
24.9 inches*Group 47 tires 63 cm
Front axle
1300 MFWD
Front axle
1500 MFWD
Front axle
ILS 42 KPH
Front axle
ILS 50 KPH
Rear axle
4.331 by 118.5 inches 110 by 3009 mm
Rear axle
4.724 by 96 inches 119 by 2438 mm
Rear axle
4.724 by 118.5 inches 119 by 3009 mm
Front tread
62 to 88 inches 157 to 223 cm
John Deere 8270R Weight
27553 lbs*With Power shift, duals, Cat 3 hitch 12498 kg
32691 lbs*With IVT, duals, Cat 4 hitch 14828 kg
Max capacity
39683 lbs 18000 kg
Max front axle
17637 lbs 8000 kg
Max rear axle
25353 lbs 11500 kg

Tests

OCED Tractor Test 2099
Diesel 16-speed 4WD October 16 - 27, 2014 Link: OCED Tractor Test 2099 file
PTO performance
Max power
268.62 hp 200.3 kW
Fuel use
13.7 gal/hour 51.9 l/hour
Power at rated engine speed
237.35 hp 177.0 kW
Fuel use
12.7 gal/hour 48.1 l/hour
Power at rated PTO speed
260.62 hp 194.3 kW
Fuel use
13.5 gal/hour 51.1 l/hour
Drawbar performance
Max power
217.51 hp 162.2 kW
Fuel use
12.6 gal/hour 47.7 l/hour
Gear 8 used for power test.
Max pull
24998 lbs 11339 kg
Gear 5 used for pull test.

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 8270R based on its 270 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁Commercial / Field ScaleHigh horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing
15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼Commercial / Field ScaleLarge commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙Commercial / Field ScaleBroad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage
Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)Commercial / Field ScaleHigh-capacity commercial forage harvesting (1000 RPM PTO).
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 8270R.

Estimated Continuous Field Runtime: 12.1 hrs

Approximately 12.1 hours of continuous field operation at ~75% rated power on a full tank (170.4 gal / 645 L).

Estimated 75% Load Fuel Burn~14 gal/hr (53.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

John Deere 8270R Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 8270R.

Converted Equivalents:

Horsepower (HP)270 hp
Kilowatts (kW)201.3 kW
Metric Horsepower (PS / CV)273.7 PS

Direct Competitor Comparison

Compare John Deere 8270R against same-era industry alternatives in the same horsepower class.

Current Model
John Deere

John Deere 8270R

Engine Power:Diesel (gross): 270 hp / 201.3 kW
★ Baseline Reference
New HollandMarket Competitor

New Holland T8020

Engine Power:244.1
Production Years:2007 - 2010
ClaasMarket Competitor

Claas Axion 850

Engine Power:245
Production Years:2018 - 2026
Deutz-FahrMarket Competitor

Deutz-Fahr Agrotron 265

Engine Power:246.8
Production Years:2003 - 2006
CaseIHMarket Competitor

CaseIH Magnum 245

Engine Power:248
Production Years:2008 - 2011