John Deere 8410

The John Deere 8410 is a tractor produced by John Deere. It is equipped with a 496 ci 8.1 L engine. The listed engine power is 236.79 hp 176.6 kW. Transmission: PowerShift. Operating weight: 20,440 lbs 9271 kg.

Engine Power
236.79 hp 176.6 kW
Fuel & Capacities
135 gal 511.0 L
Transmission
PowerShift
Operating Weight
20,440 lbs 9271 kg

Overview

John Deere 8410 tractor photo
1999 - 2002 8000 Ten SeriesRow-Crop tractor 8000 Ten Series Row-Crop tractor
Production
Manufacturer
John Deere
Row-Crop tractor
Built in Waterloo, Iowa, USA
Variants
8410
wheeled tractor
8410T
crawler tractor
John Deere 8410 Engine
John Deere 8.1L 6-cyl diesel
Fuel tank
135 gal 511.0 L
Engine details ...
John Deere 8410 Transmission
16-speed
Transmission details ...
John Deere 8410 Power
PTO (claimed)
235 hp 175.2 kW
Drawbar (tested)
203.49 hp 151.7 kW
PTO (tested)
269.98 hp 201.3 kW
Performance test details ...
Mechanical
Four-wheel drive
Cab standard.
Hydraulics
Type
closed center PFC
Valves
3 to 5
Pump flow
30 gpm 113.6 lpm
Tractor hitch
Rear Type
III, IIIN
Rear lift
11,700 lbs 5307 kg
15,650 lbs (optional) 7098 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
1000
540/1000 OptOptional
Dimensions & Tires
Wheelbase
116.9 inches 296 cm
Weight
20,440 lbs 9271 kg
Full dimensions and tires ...
Electrical
Ground
negative
Charging amps
140
Batteries
2
Battery CCA
1,850
Battery volts
12
References
8410 references literature
8000/8000T TEN Series Tractors Product Information Handbook published in 1999, by John Deere

Engine

Engine Detail — 496 ci / 8.1 L Diesel

Manufacturer
John Deere
Configuration
turbocharged aftercooled diesel, 6-cylinder, liquid-cooled inline
Displacement
496 ci 8.1 L
Bore/Stroke
4.56x5.06 inches 116 x 129 mm
Compression
16.5:1
Rated RPM
2200
Torque
829 lb-ft 1124.1 Nm
Starter volts
12
Oil capacity
29.6 qts 28.0 L
Coolant capacity
35.9 qts 34.0 L

Transmission

Transmission — PowerShift

Transmission
PowerShift
Gears
16 forward and 4 reverse
With 710/70R38 rear tires. 16th gear speed at 2400 RPM. R4 speed at 1600 RPM.
8410 PowerShift  speeds

Dimensions

John Deere 8410 Tires
Dimensions
Wheelbase
116.9 inches 296 cm
Length
206.5 inches 524 cm
Height
120.2 inches 305 cm
Weight
20,440 lbs 9271 kg
Ground clearance
23.2 inches 58 cm

Tests

OCED Tractor Test 1777
Diesel 16-speed 4WD April 4 - May 12, 2000 Link: OCED Tractor Test 1777 file
PTO performance
Max power
269.98 hp 201.3 kW
Fuel use
14.2 gal/hour 53.7 l/hour
Power at rated engine speed
236.79 hp 176.6 kW
Fuel use
13.2 gal/hour 50.0 l/hour
Drawbar performance
Max power
203.49 hp 151.7 kW
Fuel use
13.1 gal/hour 49.6 l/hour
Gear 8 used for power test.
Max pull
30,087 lbs 13647 kg
Gear 3 used for pull test.

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 8410 based on its 236.79 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁Commercial / Field ScaleHigh horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing
15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼Commercial / Field ScaleLarge commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙Commercial / Field ScaleBroad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage
Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)Commercial / Field ScaleHigh-capacity commercial forage harvesting (1000 RPM PTO).
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 8410.

Estimated Continuous Field Runtime: 11 hrs

Approximately 11 hours of continuous field operation at ~75% rated power on a full tank (135 gal / 511 L).

Estimated 75% Load Fuel Burn~12.3 gal/hr (46.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

John Deere 8410 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 8410.

Converted Equivalents:

Horsepower (HP)236.8 hp
Kilowatts (kW)176.6 kW
Metric Horsepower (PS / CV)240.1 PS

Direct Competitor Comparison

Compare John Deere 8410 against same-era industry alternatives in the same horsepower class.

Current Model
John Deere

John Deere 8410

Engine Power:236.79 hp 176.6 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 4780

Engine Power:215
Production Years:1983 - 1993
FendtMarket Competitor

Fendt 922 Vario

Engine Power:215
Production Years:2006 - 2010
ClaasMarket Competitor

Claas Axion 820

Engine Power:215
Production Years:2018 - 2026
CaseIHMarket Competitor

CaseIH Puma 215

Engine Power:215
Production Years:2011 - 2013