Kubota GL321

The Kubota GL321 is a tractor produced by Kubota. It is equipped with a 91.5 ci 1.5 L engine. The listed engine power is Diesel (listed): 32.6 hp / 24.3 kW. Transmission: U-Shift. Operating weight: 2822 to 3186 pounds.

Engine Power
Diesel (listed): 32.6 hp / 24.3 kW
Fuel & Capacities
9.25 gal 35.0 L
Transmission
U-Shift
Operating Weight
2822 to 3186 pounds

Overview

Kubota GL321 tractor photo
1996 - 2001 GL SeriesCompact Utility tractor GL Series Compact Utility tractor
Production
Manufacturer
Kubota
Compact Utility tractor
Variants
GL321
utility
GL321E
narrow
Kubota GL321 Engine
Kubota 1.5L 3-cyl diesel
Fuel tank
9.25 gal 35.0 L
Engine details ...
Kubota GL321 Power
Engine
32.6 hp 24.3 kW
PTO (claimed)
29.6 hp 22.1 kW
Mechanical
Four-wheel drive
Power steering
Mechanical wet disc brakes
Two-post ROPS. Cab optional.
Hydraulics
Pump flow
6.3 gpm 23.8 lpm
Tractor hitch
Rear Type
JIS1
Rear lift
1995 lbs 904 kg
Power Take-off (PTO)
Rear PTO Type
540 (1.375)
Engine RPM
557@2800
778@2800
966@2800
1279@2800
-783@2800
Dimensions & Tires
Wheelbase
68.9 inches 175 cm
Weight
2822 to 3186 pounds
Front tire
8-16
Rear tire
13.6-24
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
References
GL321 references literature
GL (T0270-1920-8) published in 1996
Grandel 1 Plus published in 1994, by Kubota

Engine

Engine Detail — 91.5 ci / 1.5 L Diesel

Manufacturer
Kubota D1503
Fuel Type
Diesel
Configuration
3-cylinder, liquid-cooled
Displacement
91.5 ci 1.5 L
Bore/Stroke
3.268x3.638 inches 83 x 92 mm
Power
32.6 hp 24.3 kW
Rated RPM
2800
Starter
electric
Starter volts
12

Transmission

Transmission options
16-speed gear
16-speed power shift

Transmission — 16 forward and reverse gear

Type
gear
Gears
16 forward and reverse
Clutch
dry disc
Four gears (1-4) in two ranges (low/high) with additional creeper range and shuttle shift.
GL321  gear speeds

Transmission — U-Shift

Transmission
U-Shift
Type
power shift
Gears
16 forward and reverse
Eight power-shift gears in two ranges with shuttle.

Dimensions

Kubota GL321 Tires
Standard tires (ag)
Front: 8-16. Rear: 13.6-24
Dimensions
Wheelbase
68.9 inches 175 cm
Length
125.2 inches 318 cm
Width
57.3 inches 145 cm
Height (ROPS)
78 inches 198 cm
Height (cab)
78.4 inches 199 cm
ROPS Weight
2822 lbs 1280 kg
Cab Weight
3186 lbs 1445 kg
Ground clearance
14.2 inches 36 cm
Front tread
44.5 inches 113 cm
Rear tread
43.7 to 62 inches 110 to 157 cm

Photos

Kubota GL321 tractor photo

Kubota GL321 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Kubota GL321 based on its 32.6 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)Medium DutyStandard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing
5 ft (60 in)1.5 mMedium DutyPasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep
54 to 60 in135 - 150 cmMedium DutyThorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Kubota GL321.

Estimated Continuous Field Runtime: 5.5 hrs

Approximately 5.5 hours of continuous field operation at ~75% rated power on a full tank (9.3 gal / 35 L).

Estimated 75% Load Fuel Burn~1.7 gal/hr (6.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Kubota GL321 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Kubota GL321.

Converted Equivalents:

Horsepower (HP)32.6 hp
Kilowatts (kW)24.3 kW
Metric Horsepower (PS / CV)33.1 PS

Direct Competitor Comparison

Compare Kubota GL321 against same-era industry alternatives in the same horsepower class.

Current Model
Kubota

Kubota GL321

Engine Power:Diesel (listed): 32.6 hp / 24.3 kW
★ Baseline Reference
DeereMarket Competitor

Deere 3120

Engine Power:29.5
Production Years:2005 - 2008
OliverMarket Competitor

Oliver OC-3

Engine Power:29.4
Production Years:1951 - 1957
Minneapolis-MolineMarket Competitor

Minneapolis-Moline ZTU

Engine Power:29.4
Production Years:1936 - 1948
PasqualiMarket Competitor

Pasquali 996

Engine Power:29.5
Production Years:1970 - 1981