Kubota KT250
The Kubota KT250 is a tractor produced by Kubota. It is equipped with a 89.3 ci 1.5 L engine. The listed engine power is Diesel (listed): 24.7 hp / 18.4 kW. Transmission: Glideshift.
Engine Power
Diesel (listed): 24.7 hp / 18.4 kW
Fuel & Capacities
7.4 gal
28.0 L
Transmission
Glideshift
Overview
 | 2005 - 2008
KT Kingeye SeriesCompact Utility tractor
KT Kingeye Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Kubota |
Compact Utility tractor | |
Kubota KT250 Engine | |
|---|---|
Kubota 1.5L 3-cyl diesel | |
Fuel tank | 7.4 gal
28.0 L |
Engine details ...  | |
Kubota KT250 Power | |
|---|---|
Engine | 24.7 hp
18.4 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Two-post folding ROPS. Cab optional with air-conditioning. |
Tractor hitch | |
|---|---|
Rear Type | I |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 525@2600 |
760@2600 | |
1182@2600 | |
-640@2600 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 59.1 inches
150 cm |
Front tire | 6-14 |
Rear tire | 9.5-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 89.3 ci / 1.5 L Diesel
Manufacturer | Kubota D1463 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 89.3 ci
1.5 L |
Bore/Stroke | 3.23x3.64 inches
82 x 92 mm |
Power | 24.7 hp
18.4 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
12-speed | |
48-speed power shift |
Transmission — 12 forward and reverse
Gears | 12 forward and reverse |
Clutch | dry disc |
Three gears (1-3) in four ranges (creeper, low, medium, high) with shuttle shift. | |
 | |
Transmission — Glideshift
Transmission | Glideshift |
Type | power shift |
Gears | 48 forward and 30 reverse |
Sixteen gears (10 in reverse) with three ranges. Gears may be shifted sequentially while moving, without using the clutch. Tractor must be stopped, and clutch used, to shift ranges. | |
 | |
Dimensions
Kubota KT250 Tires | |
|---|---|
Standard tires (ag) | Front: 6-14. Rear: 9.5-24 |
Optional tires (ag) | Front: 7-14. Rear: 11.2-24 |
Dimensions | |
|---|---|
Wheelbase | 59.1 inches
150 cm |
ROPS Length | 112.6 inches
286 cm |
Cab Length | 112 inches
284 cm |
Width | 46.5 inches
118 cm |
Height (ROPS) | 76.2 inches
193 cm |
Height (cab) | 77.2 inches
196 cm |
Ground clearance | 13 inches
33 cm |
Front tread | 38.2 inches
97 cm |
Rear tread | 37.4/42.1 inches
94/106 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Kubota KT250 based on its 24.7 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Kubota KT250.
Estimated Continuous Field Runtime: 5.8 hrs
Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (7.4 gal / 28 L).
Estimated 75% Load Fuel Burn~1.3 gal/hr (4.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Kubota KT250 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Kubota KT250.
Converted Equivalents:
Horsepower (HP)24.7 hp
Kilowatts (kW)18.4 kW
Metric Horsepower (PS / CV)25 PS
Direct Competitor Comparison
Compare Kubota KT250 against same-era industry alternatives in the same horsepower class.
Current Model
Kubota
Kubota KT250
Engine Power:Diesel (listed): 24.7 hp / 18.4 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester Farmall
Engine Power:22.3
Production Years:1924 - 1932
Related models
Kubota B1600
- Power:
- 20
- Production years:
- 1979 - 1982
Kubota B1750
- Power:
- 20
- Production years:
- 1988 - 1996
Kubota L2000
- Power:
- 20
Kubota KB205
- Power:
- 20.3
- Production years:
- 2008 - 2009
Kubota FT21
- Power:
- 20.7
- Production years:
- 2012 - 2015