Landini 10000S
The Landini 10000S is a tractor produced by Landini. It is equipped with a 353.9 ci 5.8 L engine. The listed engine power is Diesel (listed): 103 hp / 76.8 kW. Transmission: 12 forward and 4 reverse. Operating weight: 9520 to 10251 pounds.
Engine Power
Diesel (listed): 103 hp / 76.8 kW
Fuel & Capacities
41.6 gal
157.5 L
Transmission
12 forward and 4 reverse
Operating Weight
9520 to 10251 pounds
Overview
 | 1987 - 1993
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Landini |
Row-Crop tractor | |
Variants | |
|---|---|
1014 | similar Massey Ferguson model |
Landini 10000S Engine | |
|---|---|
Perkins 5.8L 6-cyl diesel | |
Engine details ...  |
Landini 10000S Transmission | |
|---|---|
12-speed | |
Transmission details ...  |
Landini 10000S Power | |
|---|---|
Engine | 103 hp
76.8 kW |
PTO (claimed) | 92 hp
68.6 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | planetary |
Differential lock | mechanical rear |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. | |
Capacity | |
|---|---|
Fuel | 41.6 gal
157.5 L |
Hydraulic system | 22.5 gal
85.2 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 22.5 gal
85.2 L |
Total flow | 14.0 gpm
53.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 9371 lbs
4250 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 104.7 inches
265 cm |
4WD Wheelbase | 102.8 inches
261 cm |
Weight | 9520 to 10251 pounds |
Front tire | 11.00-16 |
2WD Rear tire | 18.4-38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 45 |
References | |
|---|---|
 | |
10000S published by Landini |
Engine
Engine Detail — 353.9 ci / 5.8 L Diesel
Manufacturer | Perkins A6.3541 |
Fuel Type | Diesel |
Configuration | 6-cylinder, liquid-cooled |
Displacement | 353.9 ci
5.8 L |
Bore/Stroke | 3.875x5.00 inches
98 x 127 mm |
Power | 103 hp
76.8 kW |
Fuel system | direct injection |
Rated RPM | 2400 |
Torque | 297.3 lb-ft
403.1 Nm |
Torque RPM | 1300 |
Oil capacity | 17 qts
16.1 L |
Coolant capacity | 25.4 qts
24.0 L |
Transmission
Transmission — 12 forward and 4 reverse
Gears | 12 forward and 4 reverse |
Clutch | 304.8mm dry disc |
 | |
Dimensions
Landini 10000S Tires | |
|---|---|
2WD Standard tires (ag) | Front: 11.00-16. Rear: 18.4-38 |
4WD Standard tires (ag) | Front: 13.6-28. Rear: 18.4-38 |
Dimensions | |
|---|---|
2WD Wheelbase | 104.7 inches
265 cm |
4WD Wheelbase | 102.8 inches
261 cm |
Length | 173.3 inches
440 cm |
Width | 80.6 inches*Minimum width.
204 cm |
Height (cab) | 118.5 inches
300 cm |
2WD Weight | 9520 lbs
4318 kg |
4WD Weight | 10251 lbs
4649 kg |
2WD Ground clearance | 23.1 inches
58 cm |
4WD Ground clearance | 15.1 inches
38 cm |
2WD Front tread | 63 to 78.7 inches
160 to 199 cm |
4WD Front tread | 65 inches
165 cm |
Rear tread | 62.4 to 83.1 inches
158 to 211 cm |
Photos
Landini 10000S
Recommended Implements & Sizing Guide
Engineering recommendations for Landini 10000S based on its 103 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Landini 10000S.
Estimated Continuous Field Runtime: 7.8 hrs
Approximately 7.8 hours of continuous field operation at ~75% rated power on a full tank (41.6 gal / 157.5 L).
Estimated 75% Load Fuel Burn~5.4 gal/hr (20.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Landini 10000S Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Landini 10000S.
Converted Equivalents:
Horsepower (HP)103 hp
Kilowatts (kW)76.8 kW
Metric Horsepower (PS / CV)104.4 PS
Direct Competitor Comparison
Compare Landini 10000S against same-era industry alternatives in the same horsepower class.
Current Model
Landini
Landini 10000S
Engine Power:Diesel (listed): 103 hp / 76.8 kW
★ Baseline Reference
Related models
Landini 5-090H
- Power:
- 83
- Production years:
- 2010 - 2020
Landini Advantage 85F
- Power:
- 83
- Production years:
- 1995 - 2000
Landini Powerfarm 90
- Power:
- 83
- Production years:
- 2007 - 2020
Landini Rex 90
- Power:
- 83
- Production years:
- 2010 - 2020
Landini 4-090
- Power:
- 85
- Production years:
- 2014 - 2024