TractorData Logo
TractorData

Landini 5-100H

The Landini 5-100H is a tractor produced by Landini. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 92.5 hp / 69.0 kW. Transmission: TOP T-TRONIC Creeper. Operating weight: 8,030 lbs 3642 kg.

Engine Power
Diesel (listed): 92.5 hp / 69.0 kW
Fuel & Capacities
27 gal 102.2 L
Transmission
TOP T-TRONIC Creeper
Operating Weight
8,030 lbs 3642 kg

Overview

Landini 5-100H tractor photo
2010 - 5H Series
2010 -
5H Series
Production
Manufacturer
Landini
Landini 5-100H Engine
Perkins 4.4L 4-cyl diesel
Fuel tank
27 gal 102.2 L
Engine details ...
Landini 5-100H Power
Engine
92.5 hp 69.0 kW
PTO (claimed)
79 hp 58.9 kW
Mechanical
Four-wheel drive
Wet disc brakes
Powerfarm cab standard. Air-conditioning and pneumatic seat optional.
Hydraulics
Valves
2 to 4
Pump flow
13.8 gpm 52.2 lpm
Total flow
21.6 gpm 81.8 lpm
Tractor hitch
Rear Type
II
Rear lift
9,570 lbs 4340 kg
Front Hitch
II (optional)
Front lift
3,960 lbs 1796 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/750
540/1000 (optional)
540/750/1000 (optional)
ground (optional)
Dimensions & Tires
Wheelbase
92 inches 233 cm
Weight
8,030 lbs 3642 kg
Front tire
380/70R24
Rear tire
480/70R34
Full dimensions and tires ...

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer
Perkins 1104D-44TA
Configuration
turbocharged aftercooled diesel, 4-cylinder, liquid-cooled
Displacement
268.5 ci 4.4 L
Bore/Stroke
4.13x5.00 inches 105 x 127 mm
Emissions
Tier III
Power
92.5 hp 69.0 kW
Torque
289.9 lb-ft 393.1 Nm
Starter type
electric

Transmission

Transmission options
12-speed partial power shift with shuttle
36-speed partial power shift with hydraulic shuttle
24-speed partial power shift with shuttle
48-speed partial power shift with hydraulic shuttle

Transmission — SPEED FOUR

Transmission
SPEED FOUR
Type
partial power shift with shuttle
Gears
12 forward and reverse
Standard transmission. Three speeds with four ranges. Optional creeper range provides 16 speeds in each direction. Either with TECHNO mechanical shuttle, or TOP hydraulic shuttle.

Transmission — TOP T-TRONIC

Transmission
TOP T-TRONIC
Type
partial power shift with hydraulic shuttle
Gears
36 forward and 12 reverse
The T-Tronic adds a high-medium-low power shift to the basic transmission with hydraulic shuttle.

Transmission — SPEED FOUR Overdrive

Transmission
SPEED FOUR Overdrive
Type
partial power shift with shuttle
Gears
24 forward and 12 reverse
Overdrive on the basic transmission.

Transmission — TOP T-TRONIC Creeper

Transmission
TOP T-TRONIC Creeper
Type
partial power shift with hydraulic shuttle
Gears
48 forward and 16 reverse
T-Tronic plus basic transmission with creeper increases available speeds.

Dimensions

Landini 5-100H Tires
Ag front
380/70R24
Ag rear
480/70R34
Dimensions
Wheelbase
92 inches 233 cm
Length
163.8 inches 416 cm
Width
83 inches 210 cm
Height (ROPS)
100.5 inches 255 cm
Height (cab)
101 inches 256 cm
Weight
8,030 lbs 3642 kg
Ground clearance
18.5 inches 46 cm

Photos

Landini 5-100H tractor photo

Landini 5-100H tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Landini 5-100H based on its 92.5 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini 5-100H.

Estimated Continuous Field Runtime: 5.6 hrs

Approximately 5.6 hours of continuous field operation at ~75% rated power on a full tank (27 gal / 102.2 L).

Estimated 75% Load Fuel Burn~4.8 gal/hr (18.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Landini 5-100H Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Landini 5-100H.

Converted Equivalents:

Horsepower (HP)92.5 hp
Kilowatts (kW)69 kW
Metric Horsepower (PS / CV)93.8 PS

Direct Competitor Comparison

Compare Landini 5-100H against same-era industry alternatives in the same horsepower class.

Current Model
Landini

Landini 5-100H

Engine Power:Diesel (listed): 92.5 hp / 69.0 kW
★ Baseline Reference
DeereMarket Competitor

Deere 2750

Engine Power:83.3
Production Years:1983 - 1986
View Full Specs→
Massey FergusonMarket Competitor

Massey Ferguson 6245

Engine Power:83.3
Production Years:1999 - 2003
View Full Specs→
Deutz-FahrMarket Competitor

Deutz-Fahr 4090.4E

Engine Power:83.8
Production Years:2018 - 2026
View Full Specs→
KubotaMarket Competitor

Kubota M85D

Engine Power:83.8
Production Years:2005 - 2008
View Full Specs→

Related models