Landini Globus 75

The Landini Globus 75 is a tractor produced by Landini. It is equipped with a 258 ci 4.2 L engine. The listed engine power is Diesel (listed): 74 hp / 55.2 kW. Transmission: 50 forward and reverse. Drive type: 4x2 2WD. Operating weight: 6,724 lbs 3050 kg.

Engine Power

Diesel (listed): 74 hp / 55.2 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

17.7 gal 67.0 L

Transmission

50 forward and reverse

Operating Weight

6,724 lbs 3050 kg

Overview

	1999 - 2001 Globus SeriesUtility tractor Globus Series Utility tractor

Production
Manufacturer	Landini
Utility tractor

Variants
Globus 75 GT	low-profile

Landini Globus 75 Engine
Perkins 4.2L 4-cyl diesel
Fuel tank	17.7 gal 67.0 L
	9 gal (aux. tank) 34.1 L
Engine details ...

Landini Globus 75 Power
Engine	74 hp 55.2 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD (optional)
Differential lock	mechanical
Steering	hydrostatic power
Hydraulic wet disc brakes
Trailer brakes	hydraulic optional

Hydraulics
Pressure	2600 psi 179.3 bar
Valves	2 or 3
SCV flow	14.2 gpm 53.7 lpm
Total flow	22.2 gpm 84.0 lpm

Tractor hitch
Rear Type	2
Control	position and draft control
Rear lift	4,600 lbs 2086 kg
	7,500 lbs (optional) 3402 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540/1000/ground
	540/750/ground

Dimensions & Tires
4WD Wheelbase	85 inches 215 cm
GT Wheelbase	85.3 inches 216 cm
Weight	6,724 lbs 3050 kg
Front tire	7.50-16
Rear tire	14.9R30 (2WD)
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 258 ci / 4.2 L Diesel

Manufacturer	Perkins 1004-42
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	258 ci 4.2 L
Bore/Stroke	4.055x5.00 inches 103 x 127 mm
Power	74 hp 55.2 kW
Rated RPM	2200
Starter volts	12

Transmission

Transmission options
25-speed
50-speed

Transmission — 25 forward and reverse

Gears

25 forward and reverse

Transmission — 50 forward and reverse

Gears

50 forward and reverse

Dimensions

Landini Globus 75 Tires
Standard tires (ag)	Front: 7.50-16. Rear: 14.9R30 (2WD)
	Front: 320/70R24. Rear: 480/70R30 (4WD)

Dimensions
4WD Wheelbase	85 inches 215 cm
GT Wheelbase	85.3 inches 216 cm
4WD Length	158 inches 401 cm
GT Length	157 inches 398 cm
4WD Width	78 inches 198 cm
GT Width	72 inches 182 cm
4WD Height (cab)	95.5 inches 242 cm
GT Height (cab)	91 inches 231 cm
Weight	6,724 lbs 3050 kg
4WD Ground clearance	15.6 inches 39 cm
GT Ground clearance	15.2 inches 38 cm
4WD Front tread	62.5 to 73 inches 158 to 185 cm
GT Front tread	54.5 to 64.5 inches 138 to 163 cm
4WD Rear tread	61 to 77 inches 154 to 195 cm
GT Rear tread	53.5 to 73 inches 135 to 185 cm

Photos

2001 Landini Globus 75 with Quicke Q920 front-end loader.

Recommended Implements & Sizing Guide

Engineering recommendations for Landini Globus 75 based on its 74 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini Globus 75.

Estimated Continuous Field Runtime: 4.6 hrs

Approximately 4.6 hours of continuous field operation at ~75% rated power on a full tank (17.7 gal / 67 L).

Estimated 75% Load Fuel Burn~3.8 gal/hr (14.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours