Landini Powerfarm 65

The Landini Powerfarm 65 is a tractor produced by Landini. It is equipped with a 201.4 ci 3.3 L engine. The listed engine power is Diesel (listed): 61 hp / 45.5 kW. Transmission: Speed Four.

Engine Power

Diesel (listed): 61 hp / 45.5 kW

Fuel & Capacities

27 gal 102.2 L

Transmission

Speed Four

Overview

	2007 - 2009 Powerfarm SeriesUtility tractor Powerfarm Series Utility tractor

Production
Manufacturer	Landini (a part of Argo)
Utility tractor
Built in Fabbrico, Italy

Landini Powerfarm 65 Engine
Perkins 3.3L 3-cyl diesel
Fuel tank	27 gal 102.2 L
Engine details ...

Landini Powerfarm 65 Power
Engine	61 hp 45.5 kW

Mechanical
Two- or four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Wet disc brakes
Two-post ROPS. Cab optional with air-conditioning.

Hydraulics
Valves	2
Pump flow	13.7 gpm 51.9 lpm
Total flow	21.6 gpm 81.8 lpm
Steering flow	7.9 gpm 29.9 lpm

Tractor hitch
Rear Type	II

Power Take-off (PTO)
Rear PTO	independent
Clutch	mechanical dry disc
Rear PTO Type	540/750 (1.375)
	540/1000 (1.375)

Dimensions & Tires
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 201.4 ci / 3.3 L Diesel

Manufacturer	Perkins 1104D-33T
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	201.4 ci 3.3 L
Bore/Stroke	4.13x5.00 inches 105 x 127 mm
Emissions	Stage III
Power	61 hp 45.5 kW
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
24-speed mechanical shuttle with creeper
24-speed mechanical shuttle with overdrive

Transmission — Speed Four

Transmission	Speed Four
Type	mechanical shuttle
Gears	12 forward and reverse
Type	mechanical shuttle with creeper
Gears	24 forward and 12 reverse

Transmission — 24 forward and 12 reverse mechanical shuttle with overdrive

Type	mechanical shuttle with overdrive
Gears	24 forward and 12 reverse

Dimensions

Landini Powerfarm 65 Tires

Dimensions

Recommended Implements & Sizing Guide

Engineering recommendations for Landini Powerfarm 65 based on its 61 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini Powerfarm 65.

Estimated Continuous Field Runtime: 8.5 hrs

Approximately 8.5 hours of continuous field operation at ~75% rated power on a full tank (27 gal / 102.2 L).

Estimated 75% Load Fuel Burn~3.2 gal/hr (12 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours