Landini 4-060
The Landini 4-060 is a tractor produced by Landini. It is equipped with a 177 ci 2.9 L engine. The listed engine power is Diesel (listed): 61 hp / 45.5 kW. Transmission: 12 forward and reverse. Operating weight: 6380 to 7130 pounds.
Engine Power
Diesel (listed): 61 hp / 45.5 kW
Fuel & Capacities
23.7 gal
89.7 L
Transmission
12 forward and reverse
Operating Weight
6380 to 7130 pounds
Overview
 | 2014 -
4 SeriesUtility tractor |
|---|---|
2014 - | |
4 Series | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | Landini (a part of Argo) |
Utility tractor | |
Landini 4-060 Engine | |
|---|---|
Deutz 2.9L 4-cyl diesel | |
Fuel tank | 23.7 gal
89.7 L |
Engine details ...  | |
Landini 4-060 Power | |
|---|---|
Engine | 61 hp
45.5 kW |
PTO (claimed) | 51 hp
38.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | outboard planetary |
Differential lock | mechanical rear |
Power steering | |
Hydraulic wet disc brakes | |
Two-post folding ROPS. Cab optional with air-conditioning. | |
Hydraulics | |
|---|---|
Type | open center |
Valves | 2 or 3 |
Pump flow | 12.9 gpm
48.8 lpm |
Steering flow | 7.4 gpm
28.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 5952 lbs
2699 kg |
7495 lbsOptOptional
3399 kg | |
Rear Arms | telescopic ends and stabilizers |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E |
540/1000 OptOptional | |
Dimensions & Tires | |
|---|---|
Wheelbase | 82.7 inches
210 cm |
Weight | 6380 to 7130 pounds |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 177 ci / 2.9 L Diesel
Manufacturer | Deutz C4DT45 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 177 ci
2.9 L |
Bore/Stroke | 3.62x4.33 inches
92 x 110 mm |
Emissions | Interim Tier IV |
Emission control | cooled exhaust gas recirculation with diesel oxidation catalyst (DOC) (EGR) |
Power | 61 hp
45.5 kW |
Maximum Power | 64 hp
47.7 kW |
Fuel system | common rail |
Rated RPM | 2200 |
Torque | 180 lb-ft
244.1 Nm |
Torque RPM | 1600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
12-speed partially synchronized | |
12-speed power shuttle |
Transmission — 12 forward and reverse partially synchronized
Type | partially synchronized |
Gears | 12 forward and reverse |
Clutch | 280mm dry disc |
Four synchronized gears in three ranges with mechanical shuttle. Also available with creeper range, providing 16 speeds. | |
Transmission — 12 forward and reverse power shuttle
Type | power shuttle |
Gears | 12 forward and reverse |
Clutch | hydraulic wet disc |
Four synchronized gears in three ranges with power shuttle | |
Dimensions
Landini 4-060 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 82.7 inches
210 cm |
Length | 165 inches
419 cm |
Width | 68.9 inches*Minimum
175 cm |
Height (ROPS) | 111 inches
281 cm |
Height (cab) | 97.2 inches
246 cm |
ROPS Weight | 6380 lbs
2893 kg |
Cab Weight | 7130 lbs
3234 kg |
Flange rear axle | |
Photos
Landini 4-060 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Landini 4-060 based on its 61 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Landini 4-060.
Estimated Continuous Field Runtime: 7.5 hrs
Approximately 7.5 hours of continuous field operation at ~75% rated power on a full tank (23.7 gal / 89.7 L).
Estimated 75% Load Fuel Burn~3.2 gal/hr (12 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Landini 4-060 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Landini 4-060.
Converted Equivalents:
Horsepower (HP)61 hp
Kilowatts (kW)45.5 kW
Metric Horsepower (PS / CV)61.8 PS
Direct Competitor Comparison
Compare Landini 4-060 against same-era industry alternatives in the same horsepower class.
Current Model
Landini
Landini 4-060
Engine Power:Diesel (listed): 61 hp / 45.5 kW
★ Baseline Reference
Related models
Landini Mistral 50
- Power:
- 49
- Production years:
- 2008 - 2015
Landini R 50
- Power:
- 49.3
- Production years:
- 1957 - 1967
Landini 5500
- Power:
- 50
- Production years:
- 1973 - 1983
Landini 5530F
- Power:
- 50
- Production years:
- 1982 - 1987
Landini 5830
- Power:
- 50
- Production years:
- 1983 - 1987