Leyland 482
The Leyland 482 is a tractor produced by Leyland. It is equipped with a 230 ci 3.8 L engine. The listed engine power is Diesel (listed): 82 hp / 61.1 kW. Transmission: 9 forward and 3 reverse. Operating weight: 7,410 lbs 3361 kg.
Engine Power
Diesel (listed): 82 hp / 61.1 kW
Fuel & Capacities
4.5 gal/hour
17.0 l/hour
Transmission
9 forward and 3 reverse
Operating Weight
7,410 lbs
3361 kg
Overview
 | 1979 - 1981
Farm/Agricultural tractor |
|---|
Production | |
|---|---|
Manufacturer | Leyland |
Farm/Agricultural tractor | |
Variants | |
|---|---|
282 | 2WD |
Leyland 482 Engine | |
|---|---|
Leyland 3.8L 4-cyl diesel | |
Engine details ...  |
Leyland 482 Transmission | |
|---|---|
9-speed | |
Transmission details ...  |
Leyland 482 Power | |
|---|---|
Engine | 82 hp
61.1 kW |
Drawbar (tested) | 56.04 hp
41.8 kW |
PTO (tested) | 74.28 hp
55.4 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Independent hydraulic dry disc brakes | |
Hydraulics | |
|---|---|
Total flow | 8.2 gpm
31.0 lpm |
Tractor hitch | |
|---|---|
Rear lift | 5,953 lbs
2700 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 83.28 inches
211 cm |
Weight | 7,410 lbs
3361 kg |
Front tire | 12.4-28 |
Rear tire | 16.9-34 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 230 ci / 3.8 L Diesel
Manufacturer | Leyland 4/98TT |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 230 ci
3.8 L |
Bore/Stroke | 3.858x4.921 inches
98 x 125 mm |
Power | 82 hp
61.1 kW |
Air cleaner | single paper element |
Compression | 16.8:1 |
Rated RPM | 2200 |
Torque | 70 lb-ft
94.9 Nm |
Torque RPM | 1200 |
Starter volts | 12 |
Transmission
Transmission — 9 forward and 3 reverse
Gears | 9 forward and 3 reverse |
 | |
Dimensions
Leyland 482 Tires | |
|---|---|
Ag front | 12.4-28 |
Ag rear | 16.9-34 |
Dimensions | |
|---|---|
Wheelbase | 83.28 inches
211 cm |
Length | 151 inches
383 cm |
Height | 103 inches
261 cm |
Operating weight | 7,410 lbs
3361 kg |
Ballasted weight | 12,000 lbs
5443 kg |
Tests
Nebraska Tractor Test 1340 | |
|---|---|
Diesel 9-speed 4WD
April 15 - 25, 1980
Link: Nebraska Tractor Test 1340 file | |
PTO performance | |
Power at rated engine speed | 74.28 hp
55.4 kW |
Fuel use | 4.7 gal/hour
17.8 l/hour |
Power at rated PTO speed | 70.86 hp
52.8 kW |
Fuel use | 4.0 gal/hour
15.1 l/hour |
Drawbar performance | |
Max power | 56.04 hp
41.8 kW |
Fuel use | 4.5 gal/hour
17.0 l/hour |
Gear 5 used for power test. | |
Recommended Implements & Sizing Guide
Engineering recommendations for Leyland 482 based on its 82 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Leyland 482.
Estimated Continuous Field Runtime: 1.1 hrs
Approximately 1.1 hours of continuous field operation at ~75% rated power on a full tank (4.5 gal / 17 L).
Estimated 75% Load Fuel Burn~4.3 gal/hr (16.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Leyland 482 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Leyland 482.
Converted Equivalents:
Horsepower (HP)82 hp
Kilowatts (kW)61.1 kW
Metric Horsepower (PS / CV)83.1 PS
Direct Competitor Comparison
Compare Leyland 482 against same-era industry alternatives in the same horsepower class.
Current Model
Leyland
Leyland 482
Engine Power:Diesel (listed): 82 hp / 61.1 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 844
Engine Power:73.8
Production Years:1974 - 1980
Related models
Leyland 602
- Power:
- 68.9
- Production years:
- 1982 - 1984
Leyland 604
- Power:
- 68.9
- Production years:
- 1982 - 1984
Leyland 470
- Power:
- 70
- Production years:
- 1973 - 1976
Leyland 272
- Power:
- 71
- Production years:
- 1976 - 1984
Leyland 472
- Power:
- 71
- Production years:
- 1979 - 1982