Massey Ferguson 1078

The Massey Ferguson 1078 is a tractor produced by Massey Ferguson. It is equipped with a 305 ci 5.0 L engine. The listed engine power is Diesel (listed): 75 hp / 55.9 kW. Transmission: 8 forward and 2 reverse. Operating weight: 10046 lbs 4556 kg.

Engine Power

Diesel (listed): 75 hp / 55.9 kW

Fuel & Capacities

22.5 gal 85.2 L

Transmission

8 forward and 2 reverse

Operating Weight

10046 lbs 4556 kg

Overview

	1971 - 1977 Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Built in Granadero Baigorria, Santa Fe, Argentina

Massey Ferguson 1078 Engine
Perkins 5.0L 6-cyl diesel
Engine details ...

Massey Ferguson 1078 Transmission
8-speed gear
Transmission details ...

Massey Ferguson 1078 Power
Engine	75 hp 55.9 kW

Mechanical
Two-wheel drive
Power steering
Disc brakes
Open operator station.

Capacity
Fuel	22.5 gal 85.2 L
Hydraulic system	9 gal 34.1 L

Hydraulics
Capacity	9 gal 34.1 L

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)
Engine RPM	540@1680

Dimensions & Tires
Wheelbase	92.5 inches 234 cm
Weight	10046 lbs 4556 kg
Front tire	7.50x18
Rear tire	18.4x34
Full dimensions and tires ...

Electrical
Ground	negative
Batteries	2
Battery volts	12
Battery AH	86

Engine

Engine Detail — 305 ci / 5.0 L Diesel

Manufacturer	Perkins A.6-305
Fuel Type	Diesel
Configuration	6-cylinder, liquid-cooled
Displacement	305 ci 5.0 L
Bore/Stroke	3.58x5.00 inches 91 x 127 mm
Power	75 hp 55.9 kW
Rated RPM	2000
Starter	electric
Starter volts	12
Oil capacity	14.5 qts 13.7 L
Coolant capacity	15.9 qts 15.0 L

Transmission

Transmission — 8 forward and 2 reverse gear

Type	gear
Gears	8 forward and 2 reverse
Clutch	304.8mm dry disc
Oil capacity	36 qts 34.1 L
Speeds with 18.4x34 rear tires.

Dimensions

Massey Ferguson 1078 Tires
Ag front	7.50x18
Ag rear	18.4x34
Ag front	6.50x15
Ag rear	15.5x38

Dimensions
Wheelbase	92.5 inches 234 cm
Length	144.9 inches 368 cm
Width	86.6 inches 219 cm
Height (steering wheel)	70.9 inches 180 cm
Weight	10046 lbs 4556 kg
Ground clearance	21.7 inches 55 cm

Photos

Massey Ferguson 1078 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 1078 based on its 75 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 1078.

Estimated Continuous Field Runtime: 5.8 hrs

Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (22.5 gal / 85.2 L).

Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours