Massey Ferguson 1734E

The Massey Ferguson 1734E is a tractor produced by Massey Ferguson. It is equipped with a 91.3 ci 1.5 L engine. The listed engine power is Diesel (listed): 34 hp / 25.4 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 2734 to 2745 pounds.

Engine Power

Diesel (listed): 34 hp / 25.4 kW

Fuel & Capacities

40 qts 37.9 L

Transmission

infinite forward and reverse (3-range)

Operating Weight

2734 to 2745 pounds

Overview

	2013 - 1700 SeriesCompact Utility tractor
2013 -
1700 Series
Compact Utility tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Compact Utility tractor

Massey Ferguson 1734E Engine
Shibaura 1.5L 3-cyl diesel
Engine details ...

Massey Ferguson 1734E Power
Engine	34 hp 25.4 kW
PTO (claimed)	29 hp (gear) 21.6 kW
	27.2 hp (hydro) 20.3 kW

Mechanical
Two- or four-wheel drive
Final drives	bull gear
Differential lock	rear standard
Steering	hydrostatic power
Wet disc brakes
Two-post folding ROPS.

Hydraulics
Type	open center gear pump
SCV flow	6.7 gpm 25.4 lpm
Total flow	10.5 gpm 39.7 lpm
Steering flow	3.8 gpm 14.4 lpm

Tractor hitch
Rear Type	I
Rear lift (at ends)	2205 lbs 1000 kg
Rear lift (at 24"/610mm)	1598 lbs 724 kg

Power Take-off (PTO)
Rear PTO	live
Clutch	over-running
Rear PTO Type	540 (1.375)
Engine RPM	540@2455

Dimensions & Tires
Wheelbase	65.9 inches 167 cm
Weight	2734 to 2745 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 91.3 ci / 1.5 L Diesel

Manufacturer	Shibaura N843T-F
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	91.3 ci 1.5 L
Bore/Stroke	3.307x3.543 inches 84 x 90 mm
Emissions	Tier IV
Emission control	internal exhaust-gas recirculatio , diesel oxidation catalst (DOC), regenerating diesel particulate filter (DPF) (iEGR)
Power	34 hp 25.4 kW
Rated RPM	2600
Starter	electric
Starter volts	12
Oil capacity	4.9 qts 4.6 L
Coolant capacity	5.3 qts 5.0 L

Transmission

Transmission options
9-speed gear
hydrostatic

Transmission — 9 forward and 3 reverse gear

Type	gear
Gears	9 forward and 3 reverse
Clutch	225mm dry disc
Oil capacity	40 qts 37.9 L
With 11.2-24 R1 rear tires.

Transmission — infinite forward and reverse (3-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (3-range)
With 11.2-24 R1 rear tires.

Dimensions

Massey Ferguson 1734E Tires
Lawn/turf front	27x8.50-15
Lawn/turf rear	38x14.00-20
Industrial front	27x8.50-15
Industrial rear	15x19.5

Dimensions
Wheelbase	65.9 inches 167 cm
Length	116.5 inches 295 cm
Width	52.4 inches*Minimum width with R1 tires. 133 cm
Height (ROPS)	97.6 inches 247 cm

Massey Ferguson 1734E Weight
Gear	2734 lbs 1240 kg
Hydro	2745 lbs 1245 kg
Max capacity	4409 lbs 1999 kg
Max front axle	2205 lbs 1000 kg
Max rear axle	2205 lbs 1000 kg

Photos

Massey Ferguson 1734E

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 1734E based on its 34 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 1734E.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours