Massey Ferguson 1840E

The Massey Ferguson 1840E is a tractor produced by Massey Ferguson. It is equipped with a 111.4 ci 1.8 L engine. The listed engine power is Diesel (listed): 39.4 hp / 29.4 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 2877 lbs 1305 kg.

Engine Power

Diesel (listed): 39.4 hp / 29.4 kW

Fuel & Capacities

10 gal 37.9 L

Transmission

infinite forward and reverse (3-range)

Operating Weight

2877 lbs 1305 kg

Overview

	2020 - 1800E SeriesCompact Utility tractor
2020 -
1800E Series
Compact Utility tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Compact Utility tractor

Massey Ferguson 1840E Engine
Iseki 1.8L 3-cyl diesel
Fuel tank	10 gal 37.9 L
Engine details ...

Massey Ferguson 1840E Power
Engine	39.4 hp 29.4 kW
Gear PTO (claimed)	33.5 hp 25.0 kW
Hydro PTO (claimed)	31.5 hp 23.5 kW

Mechanical
Four-wheel drive
Differential lock	mechanical rear
Power steering
Wet disc brakes
Two-post folding ROPS.

Hydraulics
Type	open center
Pump flow	7.6 gpm 28.8 lpm
Total flow	11.4 gpm 43.1 lpm
Steering flow	3.8 gpm 14.4 lpm

Tractor hitch
Rear Type	I
Rear lift (at ends)	2205 lbs 1000 kg
Rear lift (at 24"/610mm)	1598 lbs 724 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)

Dimensions & Tires
Weight	2877 lbs 1305 kg
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

E Series published in 2020, by Massey Ferguson

Engine

Engine Detail — 111.4 ci / 1.8 L Diesel

Manufacturer	Iseki
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	111.4 ci 1.8 L
Bore/Stroke	3.43x4.03 inches 87 x 102 mm
Emissions	Tier IV
Power	39.4 hp 29.4 kW
Rated RPM	2600
Starter	electric
Starter volts	12

Transmission

Transmission options
8-speed mechanical shuttle
hydrostatic

Transmission — 8 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	8 forward and reverse

Transmission — infinite forward and reverse (3-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (3-range)

Dimensions

Massey Ferguson 1840E Tires

Dimensions
Length	116.5 inches 295 cm
Width	52.4 inches 133 cm
Height	97.6 inches 247 cm
Weight	2877 lbs 1305 kg
Ground clearance	11 inches 27 cm

Photos

Massey Ferguson 1840E

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 1840E based on its 39.4 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 1840E.

Estimated Continuous Field Runtime: 4.9 hrs

Approximately 4.9 hours of continuous field operation at ~75% rated power on a full tank (10 gal / 37.9 L).

Estimated 75% Load Fuel Burn~2 gal/hr (7.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours