Massey Ferguson 188

The Massey Ferguson 188 is a tractor produced by Massey Ferguson. It is equipped with a 247.8 ci 4.1 L engine. The listed engine power is Diesel (listed): 75 hp / 55.9 kW. Transmission: Multi Power. Operating weight: 7231 to 8422 pounds.

Engine Power

Diesel (listed): 75 hp / 55.9 kW

Fuel & Capacities

22.7 gal 85.9 L

Transmission

Multi Power

Operating Weight

7,231 lbs (2WD) 3279 kg

Overview

	1972 - 1976

Production
Manufacturer	Massey Ferguson

Massey Ferguson 188 Engine
Perkins 4.1L 4-cyl diesel
Engine details ...

Massey Ferguson 188 Power
Engine	75 hp 55.9 kW
PTO (claimed)	70 hp 52.2 kW

Mechanical
Two- or four-wheel drive
Steering	power assist
Differential mechanical wet disc brakes
Open operator station.

Capacity
Fuel	22.7 gal 85.9 L
Hydraulic system	7.5 gal 28.4 L

Hydraulics
Capacity	7.5 gal 28.4 L
Total flow	11.3 gpm 42.8 lpm

Tractor hitch
Rear Type	II
Rear lift	4,550 lbs 2063 kg

Power Take-off (PTO)
Rear PTO	live
	independent OptOptional
Rear PTO Type	540

Dimensions & Tires
Wheelbase	90 inches (2WD) 228 cm
	96.5 inches (4WD) 245 cm
Weight	7231 to 8422 pounds
Front tire	8.25-16
Rear tire	16.9-34
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12
Battery AH	125

References

MF188 published by Massey Ferguson

Engine

Engine Detail — 247.8 ci / 4.1 L Diesel

Manufacturer	Perkins A4.248
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	247.8 ci 4.1 L
Bore/Stroke	3.975x5.00 inches 101 x 127 mm
Power	75 hp 55.9 kW
Air cleaner	dry element
Compression	16:1
Rated RPM	2070
Torque	220.5 lb-ft 299.0 Nm
Torque RPM	1300
Starter	electric
Starter volts	12
Oil capacity	8.3 qts 7.9 L
Coolant capacity	14.1 qts 13.3 L

Transmission

Transmission options
12-speed partial powershift
8-speed unsynchronized

Transmission — Multi Power

Transmission	Multi Power
Type	partial powershift
Gears	12 forward and 4 reverse
Clutch	dry plate
Oil capacity	30 qts 28.4 L

Transmission — 8 forward and 2 reverse unsynchronized

Type	unsynchronized
Gears	8 forward and 2 reverse

Dimensions

Massey Ferguson 188 Tires
Ag front	8.25-16 (2WD)
	11.5-24 (4WD)
Ag rear	16.9-34

Dimensions
Wheelbase	90 inches (2WD) 228 cm
	96.5 inches (4WD) 245 cm
Length	142 inches 360 cm
Width	75.2 inches 191 cm
Height (steering wheel)	67 inches 170 cm
Operating weight	7,231 lbs (2WD) 3279 kg
	8,422 lbs (4WD) 3820 kg
Clearance (front axle)	16 inches (2WD) 40 cm
	13.8 inches (4WD) 35 cm
Front tread	59 to 70 inches 149 to 177 cm (4WD)
Rear tread	56 to 88 inches 142 to 223 cm

Photos

Massey Ferguson 188

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 188 based on its 75 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 188.

Estimated Continuous Field Runtime: 5.8 hrs

Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (22.7 gal / 85.9 L).

Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours