Massey Ferguson 3095

The Massey Ferguson 3095 is a tractor produced by Massey Ferguson. It is equipped with a 365.3 ci 6.0 L engine. The listed engine power is Diesel (listed): 107 hp / 79.8 kW. Transmission: 32 forward and reverse. Operating weight: 10120 lbs 4590 kg.

Engine Power

Diesel (listed): 107 hp / 79.8 kW

Fuel & Capacities

47 gal 177.9 L

Transmission

32 forward and reverse

Operating Weight

10120 lbs 4590 kg

Overview

	1990 - 1995 Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor

Massey Ferguson 3095 Engine
Perkins 6.0L 6-cyl diesel
Fuel tank	47 gal 177.9 L
Engine details ...

Massey Ferguson 3095 Transmission
32-speed
Transmission details ...

Massey Ferguson 3095 Power
Engine	107 hp 79.8 kW

Mechanical
Two- or four-wheel drive
Power steering
Wet disc brakes
Cab standard.

Hydraulics
Pressure	2756 psi 190.0 bar
Pump flow	13.2 gpm 50.0 lpm

Tractor hitch
Rear lift	11020 lbs 4998 kg

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	106.3 inches 270 cm
Weight	10120 lbs 4590 kg
Front tire	14.9R28
Rear tire	18.4R38
Full dimensions and tires ...

Engine

Engine Detail — 365.3 ci / 6.0 L Diesel

Manufacturer	Perkins 1006
Fuel Type	Diesel
Configuration	6-cylinder, liquid-cooled
Displacement	365.3 ci 6.0 L
Bore/Stroke	3.937x5.00 inches 100 x 127 mm
Power	107 hp 79.8 kW
Rated RPM	2200
Torque	324.5 lb-ft 440.0 Nm
Torque RPM	1200
Starter type	electric

Transmission

Transmission — 32 forward and reverse

Gears

32 forward and reverse

Dimensions

Massey Ferguson 3095 Tires
Ag front	14.9R28
Ag rear	18.4R38

Dimensions
Wheelbase	106.3 inches 270 cm
Length	175.2 inches 445 cm
Height (cab)	109.1 inches 277 cm
Weight	10120 lbs 4590 kg

Photos

Massey Ferguson 3095

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 3095 based on its 107 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 3095.

Estimated Continuous Field Runtime: 8.4 hrs

Approximately 8.4 hours of continuous field operation at ~75% rated power on a full tank (47 gal / 177.9 L).

Estimated 75% Load Fuel Burn~5.6 gal/hr (21.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours