Massey Ferguson 3425

The Massey Ferguson 3425 is a tractor produced by Massey Ferguson. It is equipped with a 201.4 ci 3.3 L engine. The listed engine power is Diesel (listed): 64 hp / 47.7 kW. Transmission: Synch shuttle with creeper.

Engine Power

Diesel (listed): 64 hp / 47.7 kW

Fuel & Capacities

19.3 gal 73.1 L

Transmission

Synch shuttle with creeper

Overview

	2005 - 2010 3400 SeriesOrchard/Vineyard tractor 3400 Series Orchard/Vineyard tractor

Production
Manufacturer	Massey Ferguson
Orchard/Vineyard tractor

Variants
3425V	narrow vineyard model
3425S	standard
3425F	fruit
3425GE	ground effect low-profile model

Massey Ferguson 3425 Engine
Perkins 3.3L 3-cyl diesel
Fuel tank	19.3 gal 73.1 L
Engine details ...

Massey Ferguson 3425 Power
Engine	64 hp 47.7 kW
PTO (claimed)	57 hp 42.5 kW

Mechanical
Four-wheel drive
Steering	hydrostatic power
Hydraulic wet disc brakes
Two-post mid-mount foldable ROPS. Cab optional.

Hydraulics
Pressure	2610 psi 180.0 bar
Valves	2 to 3 rear
	2 mid optional
Pump flow	13.7 gpm 51.9 lpm
	16.4 gpm (optional tandem pump) 62.1 lpm
Steering flow	6.6 gpm 25.0 lpm

Tractor hitch
Rear Type	1/2
Rear lift (at ends)	5,732 lbs 2600 kg
Rear lift (at 24"/610mm)	3,527 lbs 1599 kg

Power Take-off (PTO)
Rear PTO Type	540/540E/1000

Dimensions & Tires
Wheelbase	78.74 inches (S/F) 199 cm
	80.71 inches (V/GE) 205 cm
Front tire	6.50-16
Rear tire	11.2R28
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

References

3400 Series published in 2005, by Massey Ferguson

Engine

Engine Detail — 201.4 ci / 3.3 L Diesel

Manufacturer	Perkins 1103C-33T
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	201.4 ci 3.3 L
Emissions	Tier II
Power	64 hp 47.7 kW
Air cleaner	dual dry element
Rated RPM	2200
Torque	46.8 lb-ft 63.5 Nm
Torque RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission options
20-speed
30-speed

Transmission — Synchronozed shuttle

Transmission	Synchronozed shuttle
Gears	20 forward and 10 reverse
Optional transmission.
Transmission	Synch shuttle with creeper
Gears	30 forward and 15 reverse

Dimensions

Massey Ferguson 3425 Tires
Ag front	6.50-16 (V)
	7.50R16 (S)
	280/70R16 (F)
	240/70R16 (GE)
Ag rear	11.2R28 (V)
	12.4R28 (S)
	380/70R24 (F)
	380/70R20 (GE)

Dimensions
Wheelbase	78.74 inches (S/F) 199 cm
	80.71 inches (V/GE) 205 cm
Length	145.64 inches 369 cm
Width	43.4 inches (V) 110 cm
	46.9 inches (S) 119 cm
	50.2 inches (GE) 127 cm
	56.4 inches (F) 143 cm

Massey Ferguson 3425 Height
	85.4 inches (F/S ROPS) 216 cm
	84.1 inches (F/S cab) 213 cm
	47.2 inches (GE wheel) 119 cm
	80.0 inches (GE cab) 203 cm
	81.3 inches (GE ROPS) 206 cm

Photos

Massey Ferguson 3425 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 3425 based on its 64 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 3425.

Estimated Continuous Field Runtime: 5.8 hrs

Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (19.3 gal / 73.1 L).

Estimated 75% Load Fuel Burn~3.3 gal/hr (12.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours