Massey Ferguson 420

The Massey Ferguson 420 is a tractor produced by Massey Ferguson. It is equipped with a 201.4 ci 3.3 L engine. The listed engine power is Diesel (listed): 64 hp / 47.7 kW. Transmission: 8 forward and reverse. Operating weight: 5016 to 6338 pounds.

Engine Power

Diesel (listed): 64 hp / 47.7 kW

Fuel & Capacities

12.7 gal 48.1 L

Transmission

8 forward and reverse

Operating Weight

5016 to 6338 pounds

Overview

	2004 - 2008 400 SeriesUtility tractor 400 Series Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor

Massey Ferguson 420 Engine
Perkins 3.3L 3-cyl diesel
Engine details ...

Massey Ferguson 420 Transmission
8-speed synchro shuttle
Transmission details ...

Massey Ferguson 420 Power
Engine	64 hp 47.7 kW

Mechanical
Two- or four-wheel drive
Steering	hydrostatic power
Hydraulic wet disc brakes
Trailer brakes	hydraulic (optional)
Two-post foldable ROPS. Cab optional.

Capacity
Fuel	12.7 gal 48.1 L
Hydraulic system	11.1 gal 42.0 L

Hydraulics
Capacity	11.1 gal 42.0 L
Pressure	2538 psi 175.0 bar
Valves	1 or 2
Pump flow	13.9 gpm 52.6 lpm

Tractor hitch
Rear Type	2/1
Control	draft, position and response control
Rear lift (at ends)	3,946 lbs 1789 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)
Engine RPM	540@1789

Dimensions & Tires
2WD Wheelbase	81.1 inches 205 cm
4WD Wheelbase	83.5 inches 212 cm
Weight	5016 to 6338 pounds
Front tire	6.00-16
Rear tire	13.6-28 (2WD)
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 201.4 ci / 3.3 L Diesel

Manufacturer	Perkins 1103C 33T
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled inline
Displacement	201.4 ci 3.3 L
Bore/Stroke	4.134x5.00 inches 105 x 127 mm
Power	64 hp 47.7 kW
Air cleaner	dual dry element
Rated RPM	2200
Torque	199.1 lb-ft 270.0 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission — 8 forward and reverse synchro shuttle

Type	synchro shuttle
Gears	8 forward and reverse
Clutch	305mm cerametalic

Dimensions

Massey Ferguson 420 Tires
Standard tires (ag)	Front: 6.00-16. Rear: 13.6-28 (2WD)
	Front: 280/70R20. Rear: 13.6-28 (4WD)

Dimensions
2WD Wheelbase	81.1 inches 205 cm
4WD Wheelbase	83.5 inches 212 cm
2WD Length	138.2 inches 351 cm
4WD Length	140.9 inches 357 cm
Height (ROPS)	93.7 inches 237 cm
Height (Folded ROPS)	71.3 inches 181 cm
Height (cab)	93.5 inches 237 cm

Massey Ferguson 420 Weight
2WD ROPS Operating	5,016 lbs 2275 kg
2WD cab Operating	5,523 lbs 2505 kg
4WD ROPS Operating	5,677 lbs 2575 kg
4WD cab Operating	6,338 lbs 2874 kg

Photos

Massey Ferguson 420

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 420 based on its 64 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 420.

Estimated Continuous Field Runtime: 3.8 hrs

Approximately 3.8 hours of continuous field operation at ~75% rated power on a full tank (12.7 gal / 48.1 L).

Estimated 75% Load Fuel Burn~3.3 gal/hr (12.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours