Massey Ferguson 461

The Massey Ferguson 461 is a tractor produced by Massey Ferguson. It is equipped with a 201.4 ci 3.3 L engine. The listed engine power is Diesel (gross): 75 hp / 55.9 kW. Transmission: 8 forward and reverse. Operating weight: 4962 to 5456 pounds.

Engine Power

Diesel (gross): 75 hp / 55.9 kW

Fuel & Capacities

12.7 gal 48.1 L

Transmission

8 forward and reverse

Operating Weight

4962 to 5456 pounds

Overview

	2004 - 2005 400 SeriesUtility tractor 400 Series Utility tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Utility tractor
Built in Turkey

Massey Ferguson 461 Engine
Perkins 3.3L 3-cyl diesel
Fuel tank	12.7 gal 48.1 L
Engine details ...

Massey Ferguson 461 Transmission
8-speed synchronized shuttle
Transmission details ...

Massey Ferguson 461 Power
Engine (gross)	75 hp 55.9 kW
PTO (claimed)	55 hp 41.0 kW

Mechanical
Two- or four-wheel drive
Final drives	planetary
Power steering
Wet disc brakes
Flat-deck platform with two-post folding ROPS.

Hydraulics
Type	open center
Valves	2
Pump flow	4.4 gpm (3-point) 16.7 lpm
	9.0 gpm (aux) 34.1 lpm
SCV flow	9.0 gpm 34.1 lpm
	13.4 gpm*Total flow with optional combining valve. 50.7 lpm
Total flow	18.9 gpm 71.5 lpm
Steering flow	5.5 gpm 20.8 lpm

Tractor hitch
Rear Type	II/I
Control	position control and top-link draft sensing
Rear lift	2711 lbs 1229 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	hydraulic wet disc
Rear PTO Type	540 (1.375)

Dimensions & Tires
Wheelbase	76.4 inches 194 cm
Weight	4962 to 5456 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

400 Series Tractors published in 2005, by Massey Ferguson

Engine

Engine Detail — 201.4 ci / 3.3 L Diesel

Manufacturer	Perkins 1103C-33T
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	201.4 ci 3.3 L
Bore/Stroke	4.134x5.00 inches 105 x 127 mm
Emissions	Tier II
Power (gross)	75 hp 55.9 kW
Starter volts	12

Transmission

Transmission — 8 forward and reverse synchronized shuttle

Type	synchronized shuttle
Gears	8 forward and reverse
Clutch	305mm dry disc
Four gears (1-4) in two ranges (low/high) with left-hand shuttle lever.

Dimensions

Massey Ferguson 461 Tires

Dimensions
Wheelbase	76.4 inches 194 cm
Length	126.8 inches 322 cm
Width	66.9 inches 169 cm
Height (ROPS)	92.5 inches 234 cm
Height (Folded ROPS)	70.3 inches 178 cm
2WD Shipping weight	4962 lbs 2250 kg
4WD Shipping weight	5456 lbs 2474 kg
Clearance (drawbar)	13 inches 33 cm

Attachments

Attachment overview
Massey Ferguson 1040 loader
Massey Ferguson 1055 loader

Photos

Massey Ferguson 461

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 461 based on its 75 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 461.

Estimated Continuous Field Runtime: 3.3 hrs

Approximately 3.3 hours of continuous field operation at ~75% rated power on a full tank (12.7 gal / 48.1 L).

Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours