Massey Ferguson 590

The Massey Ferguson 590 is a tractor produced by Massey Ferguson. It is equipped with a 247.8 ci 4.1 L engine. The listed engine power is Diesel (listed): 75 hp / 55.9 kW. Transmission: Multi-Power. Operating weight: 6660 to 7830 pounds.

Engine Power

Diesel (listed): 75 hp / 55.9 kW

Fuel & Capacities

25.9 gal 98.0 L

Transmission

Multi-Power

Operating Weight

6660 to 7830 pounds

Overview

	1977 - 1982 500 SeriesRow-Crop tractor 500 Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Built in Coventry, England

Variants
590	naturally-aspirated
590T	turbocharged

Massey Ferguson 590 Engine
Perkins 4.1L 4-cyl diesel
Fuel tank	25.9 gal 98.0 L
Engine details ...

Massey Ferguson 590 Power
Engine	75 hp 55.9 kW
PTO (claimed)	67.7 hp 50.5 kW

Mechanical
Two- or four-wheel drive
Power steering
Wet disc brakes
Cab standard with heater. ROPS available.

Hydraulics
Pump flow	6.8 gpm (main) 25.7 lpm
	9.2 gpm (aux.) 34.8 lpm

Tractor hitch
Rear Type	II
Rear lift (at 24"/610mm)	4900 lbs 2222 kg
	5818 lbsOptOptional 2639 kg

Power Take-off (PTO)
Rear PTO	live
	independent optional
Clutch	mechanical dry disc (live)
	hydraulic (independent)
Rear PTO Type	540 (1.375)
	1000 (1.375)
Engine RPM	540@1893
	1000@1900

Dimensions & Tires
Wheelbase	90 inches 228 cm
Weight	6660 to 7830 pounds
Front tire	7.50-18
Rear tire	16.9-34 (2WD)
Full dimensions and tires ...

References

New Tractor Line 500-Series published by Massey Ferguson

Engine

Engine Detail — 247.8 ci / 4.1 L Diesel

Manufacturer	Perkins A4.248
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	247.8 ci 4.1 L
Bore/Stroke	3.875x5.00 inches 98 x 127 mm
Power	75 hp 55.9 kW
Fuel system	direct injection
Pre-heating	thermostart
Rated RPM	2200
Torque	202.8 lb-ft 275.0 Nm
Torque RPM	1400
Starter type	electric

Transmission

Transmission options
8-speed gear
12-speed two-speed power shift

Transmission — 8 forward and 2 reverse gear

Type	gear
Gears	8 forward and 2 reverse
Four gears, plus reverse, in high and low ranges.

Transmission — Multi-Power

Transmission	Multi-Power
Type	two-speed power shift
Gears	12 forward and 4 reverse
Three gears in low and high ranges with two-speed Multi-Power power shift.

Dimensions

Massey Ferguson 590 Tires
Standard tires (ag)	Front: 7.50-18. Rear: 16.9-34 (2WD)
	Front: 10.00-24. Rear: 16.9-34 (4WD)

Dimensions
Wheelbase	90 inches 228 cm
Length	153 inches 388 cm
Width	80 inches 203 cm
Height (cab)	100 inches 254 cm
2WD Weight	6660 lbs 3020 kg
4WD Weight	7830 lbs 3551 kg
Clearance (drawbar)	15 inches 38 cm

Photos

Massey Ferguson 590

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 590 based on its 75 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 590.

Estimated Continuous Field Runtime: 6.6 hrs

Approximately 6.6 hours of continuous field operation at ~75% rated power on a full tank (25.9 gal / 98 L).

Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours