Massey Ferguson 7715

The Massey Ferguson 7715 is a tractor produced by Massey Ferguson. It is equipped with a 402.5 ci 6.6 L engine. The listed engine power is Diesel (gross): 140 hp / 104.4 kW. Transmission: Dyna-VT.

Engine Power

Diesel (gross): 140 hp / 104.4 kW

Fuel & Capacities

82 gal 310.4 L

Transmission

Dyna-VT

Overview

	2015 - 2018 7700 SeriesRow-Crop tractor 7700 Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Row-Crop tractor
Built in Beauvais, France
Original price	$134,998 (2015 Dyna-4 Classic )
	$174,867 (2015 Dyna-VT Premium )

Massey Ferguson 7715 Engine
AGCO POWER 6.6L 6-cyl diesel
Fuel tank	82 gal 310.4 L
Exhaust fluid (DEF)	8 gal 30.3 L
Engine details ...

Massey Ferguson 7715 Power
Engine (gross)	140 hp 104.4 kW
PTO (claimed)	120 hp 89.5 kW
Drawbar (tested)	110.8 hp 82.6 kW
PTO (tested)	148.3 hp 110.6 kW
Performance test details ...

Mechanical
Four-wheel drive
Differential lock	full-locking electro-hydraulic
Power steering
Wet disc brakes
Cab standard with air-conditioning. AGCOMMAND ready

Hydraulics
Type	closed center load sensing
Pressure	2900 psi 200.0 bar
Pump flow	29 gpm 109.8 lpm

Tractor hitch
Rear Type	III/II
Control	electronic lower-link draft sensing
Drawbar	Cat. 2

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
	540/540E/1000
	540E/1000E/1000
	540/540E/1000/1000E

Dimensions & Tires
Front tire	380/85R28
Rear tire	460/85R38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	175
	240 *Dual 120A alternators on Deluxe and Premium models.
Batteries	2
Battery CCA	600
Battery volts	12

References

7700 Series published in 2015, by Massey Ferguson

Engine

Engine Detail — 402.5 ci / 6.6 L Diesel

Manufacturer	AGCO POWER
Configuration	turbocharged air-to-air aftercooled diesel, 6-cylinder, liquid-cooled
Displacement	402.5 ci 6.6 L
Bore/Stroke	4.252x4.724 inches 108 x 120 mm
Emissions	Tier 4
Emission control	selective catalytic reduction (SCR)
Power (gross)	140 hp 104.4 kW
Fuel system	common rail
Cooling system	electronic viscous fan
Air cleaner	dual dry element
Starter	electric
Starter volts	12

Transmission

Transmission options
16-speed four-speed power shift
24-speed six-speed power shift
continuously-variable transmission (CVT)

Transmission — Dyna-4

Transmission	Dyna-4
Type	four-speed power shift
Gears	16 forward and reverse

Transmission — Dyna-6

Transmission	Dyna-6
Type	six-speed power shift
Gears	24 forward and reverse

Transmission — Dyna-VT

Transmission	Dyna-VT
Type	continuously-variable transmission (CVT)
Gears	infinite forward and reverse

Dimensions

Massey Ferguson 7715 Tires
Standard tires (ag)	Front: 380/85R28. Rear: 460/85R38

Dimensions
Flange rear axle
Bar rear axle	3.23 by 80 inches 82 by 2032 mm
Bar rear axle	3.74 by 90 inches 94 by 2286 mm

Tests

Tractor Tests
OECD 2995: diesel Dyna-4 4WD
OECD 2991: diesel Dyna-6 4WD
OECD 2988: diesel Dyna-VT 4WD

OCED Tractor Test 2995
Diesel Dyna-4 4WD June 2016 - July 2016, Link: OCED Tractor Test 2995 file
PTO performance
Max power	142.0 hp 105.9 kW
Fuel use	8.0 gal/hour 30.3 l/hour
Power at rated engine speed	136.5 hp 101.8 kW
Fuel use	8.0 gal/hour 30.3 l/hour
Power at rated PTO speed	138.1 hp 103.0 kW
Fuel use	8.0 gal/hour 30.3 l/hour
Drawbar performance
Max power	110.8 hp 82.6 kW
Fuel use	7.5 gal/hour 28.4 l/hour
Gear 3A used for power test.
Max pull	13330 lbs 6046 kg
Gear 2A used for pull test.

OCED Tractor Test 2991
Diesel Dyna-6 4WD May 2016 - August 2016, Link: OCED Tractor Test 2991 file
PTO performance
Max power	140.1 hp 104.5 kW
Fuel use	7.7 gal/hour 29.1 l/hour
Power at rated engine speed	134.6 hp 100.4 kW
Fuel use	7.7 gal/hour 29.1 l/hour
Power at rated PTO speed	135.6 hp 101.1 kW
Fuel use	7.7 gal/hour 29.1 l/hour
Drawbar performance
Max power	107.5 hp 80.2 kW
Fuel use	7.8 gal/hour 29.5 l/hour
Gear 3A used for power test.
Max pull	13375 lbs 6066 kg
Gear 1E used for pull test.

OCED Tractor Test 2988
Diesel Dyna-VT 4WD July 2016 - August 2016, Link: OCED Tractor Test 2988 file
PTO performance
Max power	148.3 hp 110.6 kW
Fuel use	8.5 gal/hour 32.2 l/hour
Power at rated engine speed	138.1 hp 103.0 kW
Fuel use	8.2 gal/hour 31.0 l/hour
Power at rated PTO speed	145.5 hp 108.5 kW
Fuel use	8.1 gal/hour 30.7 l/hour
Drawbar performance
Max power	104.7 hp 78.1 kW
Fuel use	8.2 gal/hour 31.0 l/hour
Pull at 7.94 KPH
Max pull	15130 lbs 6862 kg
Pull at 2.80 KPH

Photos

Massey Ferguson 7715 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 7715 based on its 140 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 7715.

Estimated Continuous Field Runtime: 11.3 hrs

Approximately 11.3 hours of continuous field operation at ~75% rated power on a full tank (82 gal / 310.4 L).

Estimated 75% Load Fuel Burn~7.3 gal/hr (27.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours