Massey Ferguson 7716S

The Massey Ferguson 7716S is a tractor produced by Massey Ferguson. It is equipped with a 402.5 ci 6.6 L engine. The listed engine power is Diesel (listed): 150 hp / 111.9 kW. Transmission: Dyna-6 Creeper. Operating weight: 12786 to 14197 pounds.

Engine Power

Diesel (listed): 150 hp / 111.9 kW

Fuel & Capacities

82 gal 310.4 L

Transmission

Dyna-6 Creeper

Operating Weight

12786 to 14197 pounds

Overview

	2018 - 2021 7700S SeriesRow-Crop tractor 7700S Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Row-Crop tractor
Factories	Jackson, Minnesota, USA
	Beauvais, France

Massey Ferguson 7716S Engine
AGCO Power 6.6L 6-cyl diesel
Fuel tank	82 gal 310.4 L
Exhaust fluid (DEF)	8 gal 30.3 L
Engine details ...

Massey Ferguson 7716S Power
Engine	150 hp 111.9 kW
PTO (claimed)	125 hp 93.2 kW
Drawbar (tested)	113.9 hp 84.9 kW
PTO (tested)	154.9 hp 115.5 kW
Performance test details ...

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Trailer brakes	hydraulic OptOptional
	pneumatic OptOptional
Cab standard with air-conditioning. Available cab suspension. Massey Ferguson auto-guidance ready

Hydraulics
Type	closed-center load-sensing
Pressure	2900 psi 200.0 bar
Rear valves	2 or 3
Front valves	0 to 3
Pump flow	29 gpm 109.8 lpm
	50 gpmOptOptional 189.2 lpm

Tractor hitch
Rear Type	III/II
Control	electronic draft control
Dyna-6 Rear lift (at ends)	12345 lbs 5599 kg
Dyna-VT Rear lift (at ends)	16314 lbs 7400 kg
Front lift (at ends)	6172 lbs 2799 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
Engine RPM	540@1980
	540E@1530
	1000@2030
	1000E@1570

Dimensions & Tires
Wheelbase	113.2 inches 287 cm
Weight	12786 to 14197 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

References

7700S Series published in 2020, by Massey Ferguson*
*Publication contains known errors.

Engine

Engine Detail — 402.5 ci / 6.6 L Diesel

Manufacturer	AGCO Power 66 AWF
Configuration	turbocharged intercooled diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	402.5 ci 6.6 L
Bore/Stroke	4.252x4.724 inches 108 x 120 mm
Emissions	Tier IV
Power	150 hp 111.9 kW
Maximum Power	160 hp 119.3 kW
Idle RPM	850-2100
Torque	725 lb-ft 983.1 Nm
Torque RPM	1500
Starter	electric
Starter volts	12

Transmission

Transmission options
24-speed six-speed power shift
continuously-variable transmission
48-speed creeper

Transmission — Dyna-6

Transmission	Dyna-6
Type	six-speed power shift
Gears	24 forward and reverse
Six power shift gears (A-F) in four ranges (1-4)

Transmission — Dyna-VT

Transmission	Dyna-VT
Type	continuously-variable transmission
Gears	infinite forward and reverse

Transmission — Dyna-6 Creeper

Transmission	Dyna-6 Creeper
Type	creeper
Gears	48 forward and reverse

Dimensions

Massey Ferguson 7716S Tires

Dimensions
Wheelbase	113.2 inches 287 cm
Length	194 inches 492 cm
Width	100.4 inches*Width across fenders. 255 cm
Height (cab)	118.9 inches 302 cm
Height (exhaust)	118.2 inches 300 cm
Flange rear axle
Bar rear axle
Front tread	52.8 to 87.8 inches 134 to 223 cm

Massey Ferguson 7716S Weight
	12786 lbs (Dyna-6) 5799 kg
	14197 lbs (Dyna-VT with suspension) 6439 kg
Max capacity	27557 lbs 12499 kg

Tests

Tractor Tests
OECD 2992: diesel Dyna-6 4WD
OECD 2989: diesel Dyna-VT 4WD

OCED Tractor Test 2992
Diesel Dyna-6 4WD May 2016 - August 2016, Link: OCED Tractor Test 2992 file
PTO performance
Max power	150.2 hp 112.0 kW
Fuel use	8.1 gal/hour 30.7 l/hour
Power at rated engine speed	141.1 hp 105.2 kW
Fuel use	8.1 gal/hour 30.7 l/hour
Power at rated PTO speed	149.4 hp 111.4 kW
Fuel use	8.4 gal/hour 31.8 l/hour
Drawbar performance
Max power	112.8 hp 84.1 kW
Fuel use	8.1 gal/hour 30.7 l/hour
Gear 3A used for power test.
Max pull	13625 lbs 6180 kg
Gear 1F used for pull test.

OCED Tractor Test 2989
Diesel Dyna-VT 4WD July 2016 - August 2016, Link: OCED Tractor Test 2989 file
PTO performance
Max power	154.9 hp 115.5 kW
Fuel use	8.8 gal/hour 33.3 l/hour
Power at rated engine speed	147.5 hp 110.0 kW
Fuel use	8.6 gal/hour 32.6 l/hour
Power at rated PTO speed	152.2 hp 113.5 kW
Fuel use	8.5 gal/hour 32.2 l/hour
Drawbar performance
Max power	113.9 hp 84.9 kW
Fuel use	9.0 gal/hour 34.1 l/hour
Pull at 7.86 KPH
Max pull	15465 lbs 7014 kg
Pull at 4.14 KPH

Attachments

Attachment overview
Massey Ferguson FL4227 loader
Massey Ferguson FL4327 loader

Photos

Massey Ferguson 7716S tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 7716S based on its 150 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 7716S.

Estimated Continuous Field Runtime: 10.5 hrs

Approximately 10.5 hours of continuous field operation at ~75% rated power on a full tank (82 gal / 310.4 L).

Estimated 75% Load Fuel Burn~7.8 gal/hr (29.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours