Massey Ferguson 4297

The Massey Ferguson 4297 is a tractor produced by Massey Ferguson. It is equipped with a 268.4 ci 4.4 L engine. The listed engine power is Diesel (listed): 120 hp / 89.5 kW. Transmission: 12 forward and 4 reverse. Operating weight: 14872 lbs 6745 kg.

Engine Power

Diesel (listed): 120 hp / 89.5 kW

Fuel & Capacities

52.8 gal 199.8 L

Transmission

12 forward and 4 reverse

Operating Weight

14872 lbs 6745 kg

Overview

	2010 - 2020 4200 Latin America SeriesRow-Crop tractor 4200 Latin America Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Row-Crop tractor
Built in Canoas, Brazil

Massey Ferguson 4297 Engine
AGCO Power 4.4L 4-cyl diesel
Fuel tank	52.8 gal 199.8 L
Engine details ...

Massey Ferguson 4297 Transmission
12-speed synchromesh
Transmission details ...

Massey Ferguson 4297 Power
Engine	120 hp 89.5 kW

Mechanical
Two- or four-wheel drive
Final drives	planetary
Differential lock	mechanical rear
Power steering
Hydraulic wet disc brakes
Two-post fixed ROPS. Cab optional.

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000 (1.375)

Dimensions & Tires
Wheelbase	107.9 inches 274 cm
Weight	14872 lbs 6745 kg
Front tire	10.00-16
2WD Rear tire	23.1-30
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

References

Series 4200 published in 2010, by Massey Ferguson

Engine

Engine Detail — 268.4 ci / 4.4 L Diesel

Manufacturer	AGCO Power 420DS
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled inline
Displacement	268.4 ci 4.4 L
Bore/Stroke	4.25x4.72 inches 108 x 120 mm
Power	120 hp 89.5 kW
Rated RPM	2200
Torque	339 lb-ft 459.7 Nm
Torque RPM	1400
Starter	electric
Starter volts	12
Oil capacity	15.9 qts 15.0 L

Transmission

Transmission — 12 forward and 4 reverse synchromesh

Type	synchromesh
Gears	12 forward and 4 reverse

Dimensions

Massey Ferguson 4297 Tires
2WD Standard tires (ag)	Front: 10.00-16. Rear: 23.1-30
4WD Standard tires (ag)	Front: 14.9-26. Rear: 23.1-30
2WD Optional tires (ag)	Front: 10.00-16. Rear: 18.4-38
4WD Optional tires (ag)	Front: 14.9-28. Rear: 18.4-38

Dimensions
Wheelbase	107.9 inches 274 cm
Length	180.3 inches 457 cm
Weight	14872 lbs 6745 kg

Photos

Massey Ferguson 4297 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 4297 based on its 120 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 4297.

Estimated Continuous Field Runtime: 8.5 hrs

Approximately 8.5 hours of continuous field operation at ~75% rated power on a full tank (52.8 gal / 199.9 L).

Estimated 75% Load Fuel Burn~6.2 gal/hr (23.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours