Massey Ferguson 7S.210

The Massey Ferguson 7S.210 is a tractor produced by Massey Ferguson. It is equipped with a 402.6 ci 6.6 L engine. The listed engine power is Diesel (listed): 206.5 hp / 154.0 kW. Transmission: Dyna-VT. Operating weight: 13889 to 16535 pounds.

Engine Power

Diesel (listed): 206.5 hp / 154.0 kW

Fuel & Capacities

80.6 gal 305.1 L

Transmission

Dyna-VT

Operating Weight

13889 to 16535 pounds

Overview

	2021 - 7S SeriesRow-Crop tractor
2021 -
7S Series
Row-Crop tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Row-Crop tractor

Massey Ferguson 7S.210 Engine
AGCO Power 6.6L 6-cyl diesel
Fuel tank	80.6 gal 305.1 L
Exhaust fluid (DEF)	7.9 gal 29.9 L
Engine details ...

Massey Ferguson 7S.210 Transmission
continuously-variable transmission
Transmission details ...

Massey Ferguson 7S.210 Power
Engine	206.5 hp 154.0 kW

Mechanical
Four-wheel drive
Power steering
Hydraulic wet disc brakes
Cab standard with air-conditioning.

Hydraulics
Type	closed center load sensing
Rear valves	up to 5
Front valves	up to 2
Pump flow	29.1 gpm 110.1 lpm
	39.6 gpmOptOptional 149.9 lpm
	50.2 gpmOptOptional 190.0 lpm

Tractor hitch
Rear Type	III
Rear lift	21164 lbs 9599 kg
Front Hitch	III
Front lift	7055 lbs 3200 kg
	8818 lbsOptOptional 3999 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@1870
	540E@1500
	1000@1900
	1000E@1530
Front PTO	independent
Front PTO Type	1000
Engine RPM	1000@1920

Dimensions & Tires
Wheelbase	113.4 inches 288 cm
Weight	13889 to 16535 pounds
Front tire	480/70R28
Rear tire	580/70R38
Full dimensions and tires ...

References

MF 7S published in 2021, by Massey Ferguson

Engine

Engine Detail — 402.6 ci / 6.6 L Diesel

Manufacturer	AGCO Power 66LFNT-D5
Configuration	turbocharged intercooled diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	402.6 ci 6.6 L
Bore/Stroke	4.25x4.72 inches 108 x 120 mm
Emissions	Stage V
Power	206.5 hp 154.0 kW
Maximum Power	217.3 hp 162.0 kW
Rated RPM	2100
Torque	634.3 lb-ft 860.1 Nm
Torque RPM	1500
Starter	electric
Starter volts	12

Transmission

Transmission — Dyna-VT

Transmission	Dyna-VT
Type	continuously-variable transmission
Gears	infinite forward and reverse

Dimensions

Massey Ferguson 7S.210 Tires
Standard tires (ag)	Front: 480/70R28. Rear: 580/70R38

Dimensions
Wheelbase	113.4 inches 288 cm
Length	194 inches 492 cm
Height (cab)	118.9 inches 302 cm

Massey Ferguson 7S.210 Weight
	16535 lbs 7500 kg
Shipping	13889 lbs 6300 kg
Max capacity	30865 lbs 14000 kg

Photos

Massey Ferguson 7S.210 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 7S.210 based on its 206.5 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 7S.210.

Estimated Continuous Field Runtime: 7.5 hrs

Approximately 7.5 hours of continuous field operation at ~75% rated power on a full tank (80.6 gal / 305.1 L).

Estimated 75% Load Fuel Burn~10.7 gal/hr (40.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours