Massey Ferguson 95

The Massey Ferguson 95 is a tractor produced by Massey Ferguson. It is equipped with a 356.5 ci 5.8 L engine. The listed engine power is Diesel (listed): 91 hp / 67.9 kW. Transmission: 8 forward and 2 reverse. Operating weight: 8192.4 lbs 3716 kg.

Engine Power

Diesel (listed): 91 hp / 67.9 kW

Fuel & Capacities

37 gal 140.0 L

Transmission

8 forward and 2 reverse

Operating Weight

8192.4 lbs 3716 kg

Overview

	1970 - 1973 Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Built in São Paulo, Brazil

Massey Ferguson 95 Engine
Perkins 5.8L 6-cyl diesel
Fuel tank	37 gal 140.0 L
Engine details ...

Massey Ferguson 95 Transmission
8-speed
Transmission details ...

Massey Ferguson 95 Power
Engine	91 hp 67.9 kW
PTO (claimed)	76 hp 56.7 kW

Mechanical
Two-wheel drive
Power steering
Mechanical disc brakes
Open operator station.

Hydraulics
Type	open center
Pressure	2500 psi 172.4 bar
Pump flow	6.1 gpm 23.1 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift	5379 lbs 2439 kg

Power Take-off (PTO)
Rear PTO Type	540
Engine RPM	540@1700

Dimensions & Tires
Weight	8192.4 lbs 3716 kg
Front tire	7.50x18
Rear tire	18.4/15x34
Full dimensions and tires ...

Engine

Engine Detail — 356.5 ci / 5.8 L Diesel

Manufacturer	Perkins A6.357
Fuel Type	Diesel
Configuration	6-cylinder, liquid-cooled
Displacement	356.5 ci 5.8 L
Bore/Stroke	4.50x4.10 inches 114 x 104 mm
Power	91 hp 67.9 kW
Air cleaner	oil bath
Compression	18:1
Rated RPM	2000
Torque	260.4 lb-ft 353.1 Nm
Torque RPM	1400
Firing order	1-5-3-6-2-4
Starter type	electric
Oil capacity	13.75 qts 13.0 L

Transmission

Transmission — 8 forward and 2 reverse

Gears	8 forward and 2 reverse
Oil capacity	34 qts 32.2 L

Dimensions

Massey Ferguson 95 Tires
Ag front	7.50x18
Ag rear	18.4/15x34
Ag rear	23.1/18x26

Dimensions
Length	150.4 inches 382 cm
Width	82.3 inches 209 cm
Height	91.7 inches 232 cm
Shipping weight	8192.4 lbs 3716 kg
Ballasted weight	11817 lbs 5360 kg
Front tread	60 inches 152 cm
Rear tread	64 inches 162 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 95 based on its 91 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 95.

Estimated Continuous Field Runtime: 7.8 hrs

Approximately 7.8 hours of continuous field operation at ~75% rated power on a full tank (37 gal / 140.1 L).

Estimated 75% Load Fuel Burn~4.7 gal/hr (17.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours