Minot 30 II
The Minot 30 II is a tractor produced by Minot. It is equipped with a 110.4 ci 1.8 L engine. The listed engine power is Diesel (gross): 30 hp / 22.4 kW. Transmission: 8 forward and 2 reverse. Operating weight: 3494 to 3858 pounds.
Engine Power
Diesel (gross): 30 hp / 22.4 kW
Fuel & Capacities
7.9 gal
29.9 L
Transmission
8 forward and 2 reverse
Operating Weight
3,858 lbs
1749 kg
Overview
 | 2006 - 2008
Compact Utility tractorJinma built
Compact Utility tractor
Jinma built |
|---|
Production | |
|---|---|
Distributor | Minot |
Manufacturer | Jinma |
Compact Utility tractor | |
Built in China | |
Minot 30 II Engine | |
|---|---|
1.8L 4-cyl diesel | |
Engine details ...  |
Minot 30 II Transmission | |
|---|---|
8-speed | |
Transmission details ...  |
Minot 30 II Power | |
|---|---|
Engine (gross) | 30 hp
22.4 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | power |
Two-post foldable ROPS with canopy. | |
Capacity | |
|---|---|
Fuel | 7.9 gal
29.9 L |
Hydraulic system | 2.3 gal
8.7 L |
Front axle | 7 qts
6.6 L |
Hydraulics | |
|---|---|
Capacity | 2.3 gal
8.7 L |
Total flow | 4.8 gpm
18.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Rear lift (at 24"/610mm) | 1,432 lbs
649 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | live (two-stage clutch) |
Rear PTO Type | 540/720 |
Dimensions & Tires | |
|---|---|
Wheelbase | 66 inches
167 cm |
Weight | 3494 to 3858 pounds |
Front tire | 7.5-16 |
Rear tire | 11.2-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
The MINOT 20, 25, and 30 Horsepower Diesel Tractors published by Tractor Supply Company |
Engine
Engine Detail — 110.4 ci / 1.8 L Diesel
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 110.4 ci
1.8 L |
Bore/Stroke | 3.14x3.54 inches
80 x 90 mm |
Power (gross) | 30 hp
22.4 kW |
Pre-heating | glow plugs |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 6.3 qts
6.0 L |
Coolant capacity | 7.6 qts
7.2 L |
Transmission
Transmission — 8 forward and 2 reverse
Gears | 8 forward and 2 reverse |
Oil capacity | 19.5 qts
18.5 L |
 | |
Dimensions
Minot 30 II Tires | |
|---|---|
Ag front | 7.5-16 |
Ag rear | 11.2-24 |
Dimensions | |
|---|---|
Wheelbase | 66 inches
167 cm |
Length | 120.8 inches
306 cm |
Width | 56.7 inches
144 cm |
Height | 78.1 inches
198 cm |
Shipping weight | 3,494 lbs
1584 kg |
Operating weight | 3,858 lbs
1749 kg |
Ground clearance | 11.5 inches
29 cm |
Front tread | 47.2 to 57.1 inches
119 to 145 cm |
Rear tread | 45.3 to 57.1 inches
115 to 145 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Minot 30 II based on its 30 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Minot 30 II.
Estimated Continuous Field Runtime: 5.1 hrs
Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).
Estimated 75% Load Fuel Burn~1.6 gal/hr (5.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Minot 30 II Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Minot 30 II.
Converted Equivalents:
Horsepower (HP)30 hp
Kilowatts (kW)22.4 kW
Metric Horsepower (PS / CV)30.4 PS
Direct Competitor Comparison
Compare Minot 30 II against same-era industry alternatives in the same horsepower class.
Current Model
Minot
Minot 30 II
Engine Power:Diesel (gross): 30 hp / 22.4 kW
★ Baseline Reference
Related models
Minot 25
- Power:
- 25
- Production years:
- 2006 - 2008
Minot 30
- Power:
- 30
- Production years:
- 2006 - 2008
Minot 20 II
- Power:
- 20
- Production years:
- 2008 - 2008
Minot 20
- Power:
- 20
- Production years:
- 2006 - 2008