Mitsubishi MT180

The Mitsubishi MT180 is a tractor produced by Mitsubishi. It is equipped with a 54.9 ci 0.9 L engine. The listed engine power is Diesel (listed): 18.5 hp / 13.8 kW. Transmission: 6 forward and 2 reverse. Operating weight: 1268 to 1378 pounds.

Engine Power

Diesel (listed): 18.5 hp / 13.8 kW

Fuel & Capacities

4.8 gal 18.2 L

Transmission

6 forward and 2 reverse

Operating Weight

1268 to 1378 pounds

Overview

	1984 - 1991 Compact Utility tractor

Production
Manufacturer	Mitsubishi
Compact Utility tractor

Variants
MT180 Gear	2WD
MT180D Gear	4WD
MT180HM	2WD Hydro
MT180HMD	4WD Hydro

Mitsubishi MT180 Engine
Mitsubishi 0.9L 3-cyl diesel
Engine details ...

Mitsubishi MT180 Power
Engine	18.5 hp 13.8 kW
PTO (claimed)	15.5 hp 11.6 kW

Mechanical
Two- or four-wheel drive
Differential lock	mechanical rear
Manual steering
Drum brakes
Open operator station.

Capacity
Fuel	4.8 gal 18.2 L
Hydraulic system	3.2 gal 12.1 L

Hydraulics
Type	open center
Capacity	3.2 gal 12.1 L
Pressure	1920 psi 132.4 bar
Pump flow	3.4 gpm 12.9 lpm

Tractor hitch
Rear Type	I
Control	position control

Power Take-off (PTO)
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@2340
	1000@1793

Dimensions & Tires
Wheelbase	56 inches 142 cm
Weight	1268 to 1378 pounds
Front tire	4.50-10
2WD Rear tire	8-18
Full dimensions and tires ...

Electrical
Ground	negative
Charging amps	35
Battery volts	12
Battery AH	45

References

GOK26-GOK34 (010412-10703716000) published in 2006

Engine

Engine Detail — 54.9 ci / 0.9 L Diesel

Manufacturer	Mitsubishi K3C
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	54.9 ci 0.9 L
Bore/Stroke	2.756x3.071 inches 70 x 78 mm
Power	18.5 hp 13.8 kW
Air cleaner	dry
Compression	23:1
Rated RPM	2700
Torque	38.3 lb-ft 51.9 Nm
Torque RPM	1600
Firing order	1-3-2
Starter volts	12
Oil capacity	3.2 qts 3.0 L
Coolant capacity	5.3 qts 5.0 L

Transmission

Transmission options
hydrostatic
6-speed sliding gear

Transmission — infinite forward and reverse (2-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (2-range)

Transmission — 6 forward and 2 reverse sliding gear

Type	sliding gear
Gears	6 forward and 2 reverse
Oil capacity	12.7 qts 12.0 L
With 8-18 rear tires.

Dimensions

Mitsubishi MT180 Tires
2WD Standard tires (ag)	Front: 4.50-10. Rear: 8-18
4WD Standard tires (ag)	Front: 5-12. Rear: 8-18

Dimensions
Wheelbase	56 inches 142 cm
Length	87.6 inches 222 cm
2WD Width	37 inches 93 cm
4WD Width	38.2 inches 97 cm
2WD Height (steering wheel)	46.3 inches 117 cm
4WD Height (steering wheel)	46.7 inches 118 cm
2WD Weight	1268 lbs 575 kg
4WD Weight	1378 lbs 625 kg
2WD Ground clearance	11 inches 27 cm
4WD Ground clearance	8.46 inches 21 cm
2WD Front tread	28.3 inches 71 cm
4WD Front tread	30.9 inches 78 cm
Rear tread	29.1.35 to inches 73 to 0 cm

Photos

Mitsubishi MT180

Recommended Implements & Sizing Guide

Engineering recommendations for Mitsubishi MT180 based on its 18.5 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mitsubishi MT180.

Estimated Continuous Field Runtime: 5 hrs

Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (4.8 gal / 18.2 L).

Estimated 75% Load Fuel Burn~1 gal/hr (3.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours