Mitsubishi MT285

The Mitsubishi MT285 is a tractor produced by Mitsubishi. It is equipped with a 54.9 ci 0.9 L engine. The listed engine power is Diesel (listed): 18.5 hp / 13.8 kW. Transmission: 6 forward and 2 reverse. Operating weight: 1378 lbs 625 kg.

Engine Power

Diesel (listed): 18.5 hp / 13.8 kW

Fuel & Capacities

4.75 gal 18.0 L

Transmission

6 forward and 2 reverse

Operating Weight

1378 lbs 625 kg

Overview

Production
Manufacturer	Mitsubishi

Mitsubishi MT285 Engine
Mitsubihi 0.9L 3-cyl diesel
Fuel tank	4.75 gal 18.0 L
Engine details ...

Mitsubishi MT285 Transmission
6-speed gear
Transmission details ...

Mitsubishi MT285 Power
Engine	18.5 hp 13.8 kW

Mechanical
Four-wheel drive

Hydraulics
Type	open center
Pressure	1920 psi 132.4 bar
Pump flow	3.4 gpm 12.9 lpm

Tractor hitch
Rear Type	I

Power Take-off (PTO)
Rear PTO Type	540/1000 (1.375)

Dimensions & Tires
Wheelbase	56 inches 142 cm
Weight	1378 lbs 625 kg
Front tire	5-12
Rear tire	8-18
Full dimensions and tires ...

Engine

Engine Detail — 54.9 ci / 0.9 L Diesel

Manufacturer	Mitsubihi K3C
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	54.9 ci 0.9 L
Bore/Stroke	2.76x3.07 inches 70 x 78 mm
Power	18.5 hp 13.8 kW
Compression	23:1
Rated RPM	2700
Starter	electric
Starter volts	12
Oil capacity	3.2 qts 3.0 L
Coolant capacity	5.3 qts 5.0 L

Transmission

Transmission — 6 forward and 2 reverse gear

Type	gear
Gears	6 forward and 2 reverse
Clutch	dry disc

Dimensions

Mitsubishi MT285 Tires
Ag front	5-12
Ag rear	8-18

Dimensions
Wheelbase	56 inches 142 cm
Length	87.6 inches 222 cm
Width	38.2 inches 97 cm
Height (steering wheel)	46.7 inches 118 cm
Weight	1378 lbs 625 kg
Ground clearance	8.5 inches 21 cm
Front tread	30.9 inches 78 cm
Rear tread	29.1/35 inches 73/88 cm

Photos

Mitsubishi MT285 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mitsubishi MT285 based on its 18.5 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mitsubishi MT285.

Estimated Continuous Field Runtime: 5 hrs

Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (4.8 gal / 18 L).

Estimated 75% Load Fuel Burn~1 gal/hr (3.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours