Mitsubishi MT300

The Mitsubishi MT300 is a tractor produced by Mitsubishi. It is equipped with a 91.3 ci 1.5 L engine. The listed engine power is Diesel (listed): 30 hp / 22.4 kW. Transmission: infinite forward and reverse. Operating weight: 2337 to 2558 pounds.

Engine Power

Diesel (listed): 30 hp / 22.4 kW

Fuel & Capacities

Diesel

Transmission

infinite forward and reverse

Operating Weight

2337 to 2558 pounds

Overview

	1984 - 1991

Production
Manufacturer	Mitsubishi

Variants
MT300	2WD
MT300D	4WD

Mitsubishi MT300 Engine
Mitsubishi 1.5L 3-cyl diesel
Engine details ...

Mitsubishi MT300 Power
Engine	30 hp 22.4 kW
PTO (claimed)	26 hp 19.4 kW

Mechanical
Two- or four-wheel drive
Differential lock	rear standard
Steering	manual
Steering	power OptOptional
Wet disc brakes
Open operator station.

Hydraulics
Type	open center
Pump flow	5.7 gpm 21.6 lpm
Steering flow	1.9 gpm 7.2 lpm

Tractor hitch
Rear Type	I
Control	position control
	draft control OptOptional

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@2307
	1000@2353

Dimensions & Tires
Wheelbase	62 inches 157 cm
Weight	2337 to 2558 pounds
Front tire	5.00-15
2WD Rear tire	12.4-24
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

MT300/MT300D: A New Dimension in Multi-Purpose Tractors published in 1983, by Mitsubishi

Engine

Engine Detail — 91.3 ci / 1.5 L Diesel

Manufacturer	Mitsubishi K3M
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	91.3 ci 1.5 L
Bore/Stroke	3.307x3.543 inches 84 x 90 mm
Power	30 hp 22.4 kW
Air cleaner	dry element
Rated RPM	2700
Starter volts	12

Transmission

Transmission options
9-speed synchromesh
hydrostatic

Transmission — 9 forward and 3 reverse synchromesh

Type	synchromesh
Gears	9 forward and 3 reverse
Clutch	dry disc
Three gears (1-3) plus reverse (R) in three ranges (low/medium/high). Optional creeper range.

Transmission — infinite forward and reverse hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse

Dimensions

Mitsubishi MT300 Tires
2WD Standard tires (ag)	Front: 5.00-15. Rear: 12.4-24
4WD Standard tires (ag)	Front: 7-16. Rear: 12.4-24
2WD Lawn/turf front	20x8.00-10
4WD Lawn/turf front	6-14
Lawn/turf rear	13.6-16

Dimensions
Wheelbase	62 inches 157 cm
Length	115.6 inches 293 cm
Width	55.5 inches 140 cm
4WD Height	55.9 inches 141 cm
2WD Height	56.1 inches 142 cm
2WD Weight	2337 lbs 1060 kg
4WD Weight	2558 lbs 1160 kg
4WD Ground clearance	10.8 inches 27 cm
2WD Ground clearance	13.6 inches 34 cm
2WD Front tread	42.5 to 52.6 inches 107 to 133 cm
4WD Front tread	47.2 inches 119 cm
Rear tread	39.9 to 60 inches 101 to 152 cm

Photos

Mitsubishi MT300 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mitsubishi MT300 based on its 30 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mitsubishi MT300.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours