New Holland 5010
The New Holland 5010 is a tractor produced by New Holland. It is equipped with a 219.7 ci 3.6 L engine. The listed engine power is Diesel (listed): 70 hp / 52.2 kW. Transmission: 8 forward and 2 reverse. Drive type: 4x2 2WD. Operating weight: 5,286 lbs (2WD) 2397 kg.
Engine Power
Diesel (listed): 70 hp / 52.2 kW
Drive & Traction
4x2 2WD
Fuel & Capacities
15.8 gal
59.8 L
Transmission
8 forward and 2 reverse
Operating Weight
5,286 lbs (2WD)
2397 kg
Overview
 | Utility tractor | Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | New Holland |
Utility tractor | |
Built in Queretaro, Mexico | |
New Holland 5010 Engine | |
|---|---|
New Holland 3.6L 4-cyl diesel | |
Engine details ...  |
New Holland 5010 Transmission | |
|---|---|
8-speed constant mesh | |
Transmission details ...  |
New Holland 5010 Power | |
|---|---|
Engine | 70 hp
52.2 kW |
Mechanical | |
|---|---|
Drive | 4x2 2WD |
4x4 MFWD 4WD (optional) | |
Steering | hydrostatic power |
Wet disc brakes | |
Two-post ROPS. | |
Capacity | |
|---|---|
Fuel | 15.8 gal
59.8 L |
Hydraulic system | 8.5 gal (2WD)
32.2 L |
9.0 gal (4WD)
34.1 L | |
Steering | 2.1 qts
2.0 L |
Front axle | 5.8 qts
5.5 L |
Front hubs | 1.3 qts (each)
1.2 L |
Hydraulics | |
|---|---|
Type | gear pump |
Capacity | 8.5 gal (2WD)
32.2 L |
9.0 gal (4WD)
34.1 L | |
Pressure | 2750 psi
189.6 bar |
Pump flow | 8.6 gpm
32.6 lpm |
Steering flow | 4.0 gpm
15.1 lpm |
Steering cap. | 2.1 qts
2.0 L |
Steering press. | 1450 psi
100.0 bar |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 85 inches
215 cm |
Weight | 5286 to 6035 pounds |
Front tire | 10.00-16 |
Rear tire | 16.9-30 (2WD) |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 55 |
Charging volts | 12 |
Battery volts | 12 |
Battery AH | 107 |
Engine
Engine Detail — 219.7 ci / 3.6 L Diesel
Manufacturer | New Holland |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 219.7 ci
3.6 L |
Bore/Stroke | 3.94x4.53 inches
100 x 115 mm |
Power | 70 hp
52.2 kW |
Compression | 17:1 |
Rated RPM | 2500 |
Idle RPM | 650-2800 |
Firing order | 1-3-4-2 |
Starter volts | 12 |
Oil capacity | 12.3 qts
11.6 L |
Coolant capacity | 12.4 qts
11.7 L |
Intake valve clearance | 0.010 inches (cold)
0.254 mm |
Exhaust valve clearance | 0.014 inches (cold)
0.356 mm |
Transmission
Transmission — 8 forward and 2 reverse constant mesh
Type | constant mesh |
Gears | 8 forward and 2 reverse |
Oil capacity | 34 qts (2WD)
32.2 L |
36 qts (4WD)
34.1 L |
Dimensions
New Holland 5010 Tires | |
|---|---|
Standard tires (ag) | Front: 10.00-16. Rear: 16.9-30 (2WD) |
Front: 11.2-24. Rear: 16.9-30 (4WD) | |
Dimensions | |
|---|---|
Wheelbase | 85 inches
215 cm |
Length | 136.6 inches
346 cm |
Width | 77 inches (2WD)
195 cm |
85 inches (4WD)
215 cm | |
Weight | 5,286 lbs (2WD)
2397 kg |
6,035 lbs (4WD)
2737 kg | |
Clearance (front axle) | 18.1 inches (2WD)
45 cm |
16.11 inches (4WD)
40 cm | |
Clearance (drawbar) | 17.3 inches
43 cm |
New Holland 5010 Height | |
|---|---|
Hood | 60.5 inches (2WD)
153 cm |
58.5 inches (4WD)
148 cm | |
ROPS | 97.7 inches (2WD)
248 cm |
93.54 inches (4WD)
237 cm | |
Exhaust | 100 inches (2WD)
254 cm |
101.6 inches (4WD)
258 cm | |
Photos
New Holland 5010 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland 5010 based on its 70 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland 5010.
Estimated Continuous Field Runtime: 4.3 hrs
Approximately 4.3 hours of continuous field operation at ~75% rated power on a full tank (15.8 gal / 59.8 L).
Estimated 75% Load Fuel Burn~3.6 gal/hr (13.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
New Holland 5010 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland 5010.
Converted Equivalents:
Horsepower (HP)70 hp
Kilowatts (kW)52.2 kW
Metric Horsepower (PS / CV)71 PS
Direct Competitor Comparison
Compare New Holland 5010 against same-era industry alternatives in the same horsepower class.
Current Model
New Holland
New Holland 5010
Engine Power:Diesel (listed): 70 hp / 52.2 kW
★ Baseline Reference
Related models
New Holland TT60A
- Power:
- 56
- Production years:
- 2007 - 2008
New Holland TN60A
- Power:
- 57
- Production years:
- 2004 - 2008
New Holland TN65
- Power:
- 57
- Production years:
- 1998 - 2003
New Holland 3930
- Power:
- 57.8
- Production years:
- 1990 - 2002
New Holland 4010
- Power:
- 60