New Holland PowerStar 75

The New Holland PowerStar 75 is a tractor produced by New Holland. It is equipped with a 206.7 ci 3.4 L engine. The listed engine power is Diesel (gross): 74 hp / 55.2 kW. Transmission: 20 forward and reverse. Drive type: 4x2 2WD: 4x4 MFWD 4WD. Operating weight: 5027 to 6239 pounds.

Engine Power

Diesel (gross): 74 hp / 55.2 kW

Drive & Traction

4x2 2WD: 4x4 MFWD 4WD

Fuel & Capacities

electronic high-pressure common rail direct injection

Transmission

20 forward and reverse

Operating Weight

5027 to 6239 pounds

Overview

	2018 - PowerStar SeriesUtility tractor
2018 -
PowerStar Series
Utility tractor

Production
Manufacturer	New Holland (a part of CNH)
Utility tractor
Original price was $70,392 in 2020

Variants
Farmall 75C	similar CaseIH model

New Holland PowerStar 75 Engine
FPT 3.4L 4-cyl diesel
Engine details ...

New Holland PowerStar 75 Power
Engine (gross)	74 hp 55.2 kW
PTO (claimed)	65 hp 48.5 kW

Mechanical
Drive	4x2 2WD: 4x4 MFWD 4WD
Final drives	inboard planetary
Power steering
Wet disc brakes
Two-post folding ROPS. Cab optional.

Hydraulics
Type	open center
Valves	1 to 3
Pump flow	12.5 gpm 47.3 lpm
Total flow	22 gpm 83.3 lpm
Steering flow	9.5 gpm 36.0 lpm

Tractor hitch
Rear Type	II
Rear lift (at 24"/610mm)	3664 lbs 1661 kg

Power Take-off (PTO)
Rear PTO Type	540
	540/540E OptOptional

Dimensions & Tires
2WD Wheelbase	85.8 inches 217 cm
4WD Wheelbase	83.9 inches 213 cm
Weight	5027 to 6239 pounds
Front tire	7.50x16
2WD Rear tire	16.9R30
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
Battery volts	12

References

Powerstar Tractors published in 2017, by New Holland

Engine

Engine Detail — 206.7 ci / 3.4 L Diesel

Manufacturer	FPT F5D
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	206.7 ci 3.4 L
Bore/Stroke	3.898x4.331 inches 99 x 110 mm
Emissions	Tier IV
Emission control	DOC and EGR
Power (gross)	74 hp 55.2 kW
Fuel system	electronic high-pressure common rail direct injection
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed Four synchronized gears in three ranges with power shuttle.
12-speed mechanical shuttle
20-speed creeper

Transmission — 12 forward and reverse Four synchronized gears in three ranges with power shuttle.

Type	Four synchronized gears in three ranges with power shuttle.
Gears	12 forward and reverse

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse
Transmission
Type	creeper
Gears	20 forward and reverse

Dimensions

New Holland PowerStar 75 Tires
2WD Standard tires (ag)	Front: 7.50x16. Rear: 16.9R30
4WD Standard tires (ag)	Front: 11.2R24. Rear: 16.9R30

Dimensions
2WD Wheelbase	85.8 inches 217 cm
4WD Wheelbase	83.9 inches 213 cm
2WD Length	152.9 inches 388 cm
4WD Length	151 inches 383 cm
Width	75.6 inches 192 cm
Height (ROPS)	104.4 inches 265 cm
Height (cab)	97.9 inches 248 cm
Flange rear axle

New Holland PowerStar 75 Weight
2WD ROPS	5027 lbs 2280 kg
4WD ROPS	5952 lbs 2699 kg
2WD Cab	5622 lbs 2550 kg
4WD Cab	6239 lbs 2830 kg

Attachments

Attachment overview
New Holland 655TL NSL loader
New Holland 655TL MSL loader

Photos

New Holland Power Star 75 utility tractor.

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland PowerStar 75 based on its 74 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland PowerStar 75.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours