CNH T2210
The CNH T2210 is a tractor produced by New Holland. It is equipped with a 91.3 ci 1.5 L engine. The listed engine power is Diesel (gross): 31 hp / 23.1 kW. Transmission: 9 forward and 3 reverse. Operating weight: 2605 lbs 1181 kg.
Engine Power
Diesel (gross): 31 hp / 23.1 kW
Fuel & Capacities
7.3 gal
27.6 L
Transmission
9 forward and 3 reverse
Operating Weight
2605 lbs
1181 kg
Overview
 | 2008
T2200 SeriesCompact Utility tractor
T2200 Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | CNH |
Compact Utility tractor | |
CNH T2210 Engine | |
|---|---|
Shibaura 1.5L 3-cyl diesel | |
Fuel tank | 7.3 gal
27.6 L |
Engine details ...  | |
CNH T2210 Power | |
|---|---|
Engine (gross) | 31 hp
23.1 kW |
PTO (claimed) | 26.5 hp (gear)
19.8 kW |
24.9 hp (hydro)
18.6 kW | |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | power |
SuperSteer (optional) | |
Two-post folding ROPS. | |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 7.2 gpm
27.3 lpm |
Total flow | 12.3 gpm
46.6 lpm |
Steering flow | 5.1 gpm
19.3 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Rear lift (at 24"/610mm) | 1635 lbs
741 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | live |
Rear PTO Type | 540 (1.375) |
Mid PTO Type | 2000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 63 inches
160 cm |
Weight | 2605 lbs
1181 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 91.3 ci / 1.5 L Diesel
Manufacturer | Shibaura N843 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 91.3 ci
1.5 L |
Bore/Stroke | 3.307x3.543 inches
84 x 90 mm |
Power (gross) | 31 hp
23.1 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
hydrostatic | |
9-speed gear |
Transmission — infinite forward and reverse (3-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (3-range) |
Transmission — 9 forward and 3 reverse gear
Type | gear |
Gears | 9 forward and 3 reverse |
Dimensions
CNH T2210 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 63 inches
160 cm |
Length | 112.4 inches
285 cm |
Width | 61.6 inches
156 cm |
Height (ROPS) | 84.9 inches
215 cm |
Height (Folded ROPS) | 66.6 inches
169 cm |
Shipping weight | 2605 lbs (hydro)
1181 kg |
Clearance (front axle) | 13 inches
33 cm |
Photos
CNH T2210 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland CNH T2210 based on its 31 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland CNH T2210.
Estimated Continuous Field Runtime: 4.5 hrs
Approximately 4.5 hours of continuous field operation at ~75% rated power on a full tank (7.3 gal / 27.6 L).
Estimated 75% Load Fuel Burn~1.6 gal/hr (6.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
New Holland CNH T2210 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland CNH T2210.
Converted Equivalents:
Horsepower (HP)31 hp
Kilowatts (kW)23.1 kW
Metric Horsepower (PS / CV)31.4 PS
Direct Competitor Comparison
Compare CNH T2210 against same-era industry alternatives in the same horsepower class.
Current Model
New Holland
CNH T2210
Engine Power:Diesel (gross): 31 hp / 23.1 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 140
Engine Power:28
Production Years:1958 - 1979
Related models
New Holland 1530
- Power:
- 25
- Production years:
- 1997 - 1999
New Holland TC25
- Power:
- 25
- Production years:
- 1999 - 2003
New Holland TZ25DA
- Power:
- 25
- Production years:
- 2005 - 2008
New Holland Boomer 1025
- Power:
- 26
- Production years:
- 2008 - 2011
New Holland T1030
- Power:
- 26
- Production years:
- 2008 - 2008