New Holland T6.120

The New Holland T6.120 is a tractor produced by New Holland. It is equipped with a 273.7 ci 4.5 L engine. The listed engine power is Diesel (listed): 110 hp / 82.0 kW. Transmission: AutoShift.

Engine Power

Diesel (listed): 110 hp / 82.0 kW

Fuel & Capacities

5.4 gal/hour 20.4 l/hour

Transmission

AutoShift

Overview

	2012 - 2014 T6 SeriesRow-Crop tractor T6 Series Row-Crop tractor

Production
Manufacturer	New Holland
Row-Crop tractor

New Holland T6.120 Engine
FPT 4.5L 4-cyl diesel
Engine details ...

New Holland T6.120 Power
Engine	110 hp 82.0 kW
Drawbar (tested)	75.2 hp 56.1 kW
PTO (tested)	105.0 hp 78.3 kW
Performance test details ...

Mechanical
Four-wheel drive
Steering	hydrostatic power
Hydraulic wet disc brakes

Tractor hitch
Rear Type	II

Dimensions & Tires
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 273.7 ci / 4.5 L Diesel

Manufacturer	FPT
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	273.7 ci 4.5 L
Bore/Stroke	4.094x5.197 inches 104 x 132 mm
Emissions	Interim Tier IV
Emission control	selective catalytic reduction (SCR)
Power	110 hp 82.0 kW
Maximum Power	121 hp 90.2 kW
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission options
24-speed two-speed power shift
16-speed eight-speed power shift
16-speed

Transmission — Dual Command

Transmission	Dual Command
Type	two-speed power shift
Gears	24 forward and reverse

Transmission — ElectroShift

Transmission	ElectroShift
Type	eight-speed power shift
Gears	16 forward and reverse
Four push-button power shift gears in four ranges. Clutch free shifting between ranges 1-2 and 3-4. Power shuttle.

Transmission — AutoShift

Transmission	AutoShift
Gears	16 forward and reverse
AutoShift adds automatic shifting to the ElectroShift transmission. Also available in a 17-speed version with 40 KPH or 50 KPH top speed.

Dimensions

New Holland T6.120 Tires

Dimensions

Tests

OCED Tractor Test 2699
Diesel 16-speed 4WD May 2012 - 2012, Link: OCED Tractor Test 2699 file
PTO performance
Max power	105.0 hp 78.3 kW
Fuel use	5.8 gal/hour 22.0 l/hour
Power at rated engine speed	94.7 hp 70.6 kW
Fuel use	5.7 gal/hour 21.6 l/hour
Power at rated PTO speed	102.2 hp 76.2 kW
Fuel use	5.8 gal/hour 22.0 l/hour
Drawbar performance
Max power	75.2 hp 56.1 kW
Fuel use	5.4 gal/hour 20.4 l/hour
Gear 9 used for power test.
Max pull	9710 lbs 4404 kg
Gear 5 used for pull test.

Photos

New Holland T6.120 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland T6.120 based on its 110 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland T6.120.

Estimated Continuous Field Runtime: 0.9 hrs

Approximately 0.9 hours of continuous field operation at ~75% rated power on a full tank (5.4 gal / 20.4 L).

Estimated 75% Load Fuel Burn~5.7 gal/hr (21.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours