New Holland T6.140

The New Holland T6.140 is a tractor produced by New Holland. It is equipped with a 273.7 ci 4.5 L engine. The listed engine power is Diesel (gross): 110 hp / 82.0 kW. Transmission: Auto Command. Operating weight: 10781 lbs 4890 kg.

Engine Power

Diesel (gross): 110 hp / 82.0 kW

Fuel & Capacities

46.2 gal 174.9 L

Transmission

Auto Command

Operating Weight

10781 lbs 4890 kg

Overview

	2012 - 2014 T6 SeriesRow-Crop tractor T6 Series Row-Crop tractor

Production
Manufacturer	New Holland
Row-Crop tractor
Original price	$82,098 (2014 )
	$107,314 (2014 CVT )

New Holland T6.140 Engine
FPT 4.5L 4-cyl diesel
Fuel tank	46.2 gal 174.9 L
Exhaust fluid (DEF)	9.7 gal 36.7 L
Engine details ...

New Holland T6.140 Power
Engine (gross)	110 hp 82.0 kW
Engine (max)	143 hp 106.6 kW
PTO (claimed)	90 hp 67.1 kW
Drawbar (tested)	75.2 hp 56.1 kW
PTO (tested)	105.0 hp 78.3 kW
Performance test details ...

Mechanical
Four-wheel drive
Steering	hydrostatic power
Hydraulic wet disc brakes
Horizon cab standard with air-conditioning. Optional deluxe high-profile roof. Optional cab suspension.

Hydraulics
Type	open center
	closed center load sensing (optional)
Rear valves	2 to 4
Mid valves	2 or 3
Pump flow	18.5 gpm (open) 70.0 lpm
	26.5 gpm (CCLS) 100.3 lpm
Total flow	29 gpm (open) 109.8 lpm
	38.9 gpm (CCLS) 147.2 lpm
	33 gpm (CVT) 124.9 lpm
Steering flow	12.4 gpm 46.9 lpm

Tractor hitch
Rear Type	II
Control	electronic draft control
Rear lift (at 24"/610mm)	6720 lbs 3048 kg
	7980 lbs (optional) 3619 kg
Front lift (at ends)	6834 lbs 3099 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
Engine RPM	540@1969
	1000@1924
Front PTO	optional
Front PTO Type	1000

Dimensions & Tires
Weight	10781 lbs 4890 kg
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 273.7 ci / 4.5 L Diesel

Manufacturer	FPT
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	273.7 ci 4.5 L
Bore/Stroke	4.094x5.197 inches 104 x 132 mm
Emissions	Interim Tier IV
Emission control	selective catalytic reduction (SCR)
Rated Power (gross)	110 hp 82.0 kW
Maximum Power (gross)	143 hp 106.6 kW
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission options
24-speed two-speed power shift
16-speed eight-speed power shift
16-speed
continuously variable transmission (CVT)

Transmission — Dual Command

Transmission	Dual Command
Type	two-speed power shift
Gears	24 forward and reverse

Transmission — ElectroShift

Transmission	ElectroShift
Type	eight-speed power shift
Gears	16 forward and reverse
Four push-button power shift gears in four ranges. Clutch free shifting between ranges 1-2 and 3-4. Power shuttle.

Transmission — AutoShift

Transmission	AutoShift
Gears	16 forward and reverse
AutoShift adds automatic shifting to the ElectroShift transmission. Also available in a 17-speed version with 40 KPH or 50 KPH top speed.

Transmission — Auto Command

Transmission	Auto Command
Type	continuously variable transmission (CVT)
Gears	infinite forward and reverse

Dimensions

New Holland T6.140 Tires

Dimensions
Length	169 inches 429 cm
Width	89.8 inches (min) 228 cm
Height (cab)	110.4 inches 280 cm
	115.2 inches (high) 292 cm
Shipping weight	10781 lbs 4890 kg
Ground clearance	18.8 inches 47 cm
Front axle	4WD
Front axle	TerraGlide suspension
Front axle	SuperSteer
Flange rear axle
Bar rear axle	98 inch length 2489 mm
Rear tread	60.2 to 84 inches 152 to 213 cm

Tests

OCED Tractor Test 2695
Diesel 16-speed 4WD May 2012 - 2012, Link: OCED Tractor Test 2695 file
PTO performance
Max power	105.0 hp 78.3 kW
Fuel use	5.8 gal/hour 22.0 l/hour
Power at rated engine speed	94.7 hp 70.6 kW
Fuel use	5.7 gal/hour 21.6 l/hour
Power at rated PTO speed	102.2 hp 76.2 kW
Fuel use	5.8 gal/hour 22.0 l/hour
Drawbar performance
Max power	75.2 hp 56.1 kW
Fuel use	5.4 gal/hour 20.4 l/hour
Gear 9 used for power test.
Max pull	9710 lbs 4404 kg
Gear 5 used for pull test.

Attachments

Attachment overview
New Holland 835TL loader
New Holland 845TL loader

Photos

New Holland T6.140 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland T6.140 based on its 110 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland T6.140.

Estimated Continuous Field Runtime: 8.1 hrs

Approximately 8.1 hours of continuous field operation at ~75% rated power on a full tank (46.2 gal / 174.9 L).

Estimated 75% Load Fuel Burn~5.7 gal/hr (21.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours