New Holland TC31DA

The New Holland TC31DA is a tractor produced by New Holland. It is equipped with a 91.3 ci 1.5 L engine. The listed engine power is Diesel (listed): 31 hp / 23.1 kW. Transmission: 9 forward and 3 reverse. Operating weight: 2474 lbs 1122 kg.

Engine Power

Diesel (listed): 31 hp / 23.1 kW

Fuel & Capacities

7.3 gal 27.6 L

Transmission

9 forward and 3 reverse

Operating Weight

2474 lbs 1122 kg

Overview

	2005 - 2008 Boomer TC-A SeriesCompact Utility tractor Boomer TC-A Series Compact Utility tractor

Production
Manufacturer	New Holland
Compact Utility tractor

Variants
DX31	similar CaseIH model

New Holland TC31DA Engine
Shibaura 1.5L 3-cyl diesel
Fuel tank	7.3 gal 27.6 L
Engine details ...

New Holland TC31DA Power
Engine	31 hp 23.1 kW
Hydro PTO (claimed)	24.9 hp 18.6 kW
Gear PTO (claimed)	26.5 hp 19.8 kW

Mechanical
Four-wheel drive
Power steering
Two-post ROPS.

Hydraulics
Type	open center
Pump flow	7.2 gpm 27.3 lpm
Total flow	12.3 gpm 46.6 lpm
Steering flow	5.1 gpm 19.3 lpm

Tractor hitch
Rear Type	I
Rear lift (at 24"/610mm)	1635 lbs 741 kg

Power Take-off (PTO)
Rear PTO Type	540
Mid PTO	optional
	standard with hydro

Dimensions & Tires
Wheelbase	63 inches 160 cm
	72 inches (SuperSteer) 182 cm
Weight	2474 lbs 1122 kg
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 91.3 ci / 1.5 L Diesel

Manufacturer	Shibaura N843
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	91.3 ci 1.5 L
Bore/Stroke	3.31x3.54 inches 84 x 90 mm
Power	31 hp 23.1 kW
Rated RPM	2600
Starter volts	12

Transmission

Transmission options
hydrostatic
9-speed gear

Transmission — infinite forward and reverse (3-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (3-range)

Transmission — 9 forward and 3 reverse gear

Type	gear
Gears	9 forward and 3 reverse

Dimensions

New Holland TC31DA Tires

Dimensions
Wheelbase	63 inches 160 cm
	72 inches (SuperSteer) 182 cm
Length	106.2 inches 269 cm
	115.3 inches (SuperSteer) 292 cm
Width	54.3 inches*Minimum width 137 cm
Height (ROPS)	87.8 inches 223 cm
Weight	2474 lbs 1122 kg

Photos

New Holland TC31DA tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland TC31DA based on its 31 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TC31DA.

Estimated Continuous Field Runtime: 4.5 hrs

Approximately 4.5 hours of continuous field operation at ~75% rated power on a full tank (7.3 gal / 27.6 L).

Estimated 75% Load Fuel Burn~1.6 gal/hr (6.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours