New Holland TD75D

The New Holland TD75D is a tractor produced by New Holland. It is equipped with a 238 ci 3.9 L engine. The listed engine power is Diesel (listed): 72 hp / 53.7 kW. Transmission: 20 forward and 12 reverse. Drive type: 4x2 2WD. Operating weight: 5702 to 6915 pounds.

Engine Power

Diesel (listed): 72 hp / 53.7 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

23.8 gal 90.1 L

Transmission

20 forward and 12 reverse

Operating Weight

5702 to 6915 pounds

Overview

	2002 - 2006 TDD SeriesUtility tractorTurk Traktor built TDD Series Utility tractor Turk Traktor built

Production
Distributor	New Holland
Manufacturer	Turk Traktor
Utility tractor
Built in Ankara, Turkey

New Holland TD75D Engine
Iveco 3.9L 4-cyl diesel
Fuel tank	23.8 gal 90.1 L
Engine details ...

New Holland TD75D Power
Engine	72 hp 53.7 kW
PTO (claimed)	62 hp 46.2 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD (optional)
Steering	hydrostatic power
Mechanical wet disc brakes
Two-post foldable ROPS. Cab with heat and air-conditioning optional.

Hydraulics
Type	open center
Pressure	2755 psi 190.0 bar
Valves	1 to 3
Pump flow	13.6 gpm 51.5 lpm
Total flow	21.7 gpm 82.1 lpm
Steering flow	8.1 gpm 30.7 lpm

Tractor hitch
Rear Type	II
Control	mechanical draft control
Rear lift (at 24"/610mm)	5,025 lbs 2279 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	mechanical dry
Rear PTO Type	540 (1.375)

Dimensions & Tires
Wheelbase	91 inches (2WD) 231 cm
	87 inches (4WD) 220 cm
Weight	5702 to 6915 pounds
Front tire	10.00-16
2WD Rear tire	16.9-30
Full dimensions and tires ...

Electrical
Ground	negative
Charging amps	65
Battery CCA	800
Battery volts	12

Engine

Engine Detail — 238 ci / 3.9 L Diesel

Manufacturer	Iveco 8045.06
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	238 ci 3.9 L
Power	72 hp 53.7 kW
Fuel system	Bosch injection pump
Air cleaner	dual dry elements
Pre-heating	thermostart
	block heater optional
Rated RPM	2500
Torque	184.4 lb-ft 250.0 Nm
Torque RPM	1500
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
20-speed mechanical shuttle with creeper

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse
Clutch	11-inch organic dry disc
Four synchronized gears in three non-synchronized ranges. Synchronized mechanical shuttle.

Transmission — 20 forward and 12 reverse mechanical shuttle with creeper

Type	mechanical shuttle with creeper
Gears	20 forward and 12 reverse
Clutch	11-inch organic dry disc
Optional creeper adds an additional eight forward speeds to the standard transmission.

Dimensions

New Holland TD75D Tires
2WD Standard tires (ag)	Front: 10.00-16. Rear: 16.9-30
2WD Standard tires (ag)	Front: 10.00-16. Rear: 18.4R30
4WD Standard tires (ag)	Front: 11.2R24. Rear: 16.9R30
4WD Standard tires (ag)	Front: 12.4R24. Rear: 18.4R30

Dimensions
Wheelbase	91 inches (2WD) 231 cm
	87 inches (4WD) 220 cm
Height	103.1 inches 261 cm
2WD Front tread	55.5 to 75.2 inches 140 to 191 cm
4WD Front tread	56.9 to 73.8 inches 144 to 187 cm
Rear tread	55.1 to 78.8 inches 139 to 200 cm

New Holland TD75D Weight
Shipping	5,702 lbs (2WD ROPS) 2586 kg
	6,254 lbs (4WD ROPS) 2836 kg
	6,363 lbs (2WD cab) 2886 kg
	6,915 lbs (4WD cab) 3136 kg

Photos

New Holland TD75D tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland TD75D based on its 72 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TD75D.

Estimated Continuous Field Runtime: 6.4 hrs

Approximately 6.4 hours of continuous field operation at ~75% rated power on a full tank (23.8 gal / 90.1 L).

Estimated 75% Load Fuel Burn~3.7 gal/hr (14.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours