New Holland TJ530

The New Holland TJ530 is a tractor produced by New Holland. It is equipped with a 912 ci 14.9 L engine. The listed engine power is Diesel (listed): 530 hp / 395.2 kW. Transmission: 16 forward and 2 reverse. Operating weight: 54,000 lbs 24494 kg.

Engine Power

Diesel (listed): 530 hp / 395.2 kW

Fuel & Capacities

300 gal 1135.5 L

Transmission

16 forward and 2 reverse

Operating Weight

54,000 lbs 24494 kg

Overview

	2006 - 2007 TJ II Series

Production
Manufacturer	New Holland
Built in Fargo, North Dakota, USA

New Holland TJ530 Engine
Cummins 14.9L 6-cyl diesel
Fuel tank	300 gal 1135.5 L
Engine details ...

New Holland TJ530 Transmission
16-speed full power shift
Transmission details ...

New Holland TJ530 Power
Engine	530 hp 395.2 kW
PTO (claimed)	530 hp 395.2 kW

Mechanical
Four-wheel drive
Steering	hydrostatic power
Integral hydraulic wet disc brakes
Cab standard with heat and air-conditioning

Hydraulics
Type	closed center load sensing (CCLS)
Pressure	2000 psi 137.9 bar
Valves	4 to 9
Pump flow	33 gpm 124.9 lpm
Total flow	42 gpm 159.0 lpm
	57 gpm (optional) 215.7 lpm
	94 gpm (optional MegaFlow) 355.8 lpm

Tractor hitch
Rear Type	IVN (optional)
Rear lift (at 24"/610mm)	19,620 lbs 8899 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	1000 (optional)

Dimensions & Tires
Wheelbase	154 inches 391 cm
Front tire	20.8R42
Rear tire	20.8R42
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	150
	175 (optional)
Batteries	2
Battery volts	12
Battery AH	1000

Engine

Engine Detail — 912 ci / 14.9 L Diesel

Manufacturer	Cummins QSX15
Configuration	turbocharged aftercooled diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	912 ci 14.9 L
Bore/Stroke	5.394x6.654 inches 137 x 169 mm
Power	530 hp 395.2 kW
Maximum Power	584 hp 435.5 kW
Compression	17.0:1
Rated RPM	2000
Torque	1873 lb-ft 2539.8 Nm
Torque RPM	1400
Starter	electric
Starter volts	24
Oil capacity	52 qts 49.2 L
Coolant capacity	84.4 qts 79.9 L

Transmission

Transmission — 16 forward and 2 reverse full power shift

Type	full power shift
Gears	16 forward and 2 reverse

Dimensions

New Holland TJ530 Tires
Ag front	20.8R42
Ag rear	20.8R42

Dimensions
Wheelbase	154 inches 391 cm
Length	298 inches 756 cm
Height	150 inches 381 cm
Max weight	54,000 lbs 24494 kg

Photos

New Holland TJ530 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland TJ530 based on its 530 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TJ530.

Estimated Continuous Field Runtime: 10.9 hrs

Approximately 10.9 hours of continuous field operation at ~75% rated power on a full tank (300 gal / 1135.6 L).

Estimated 75% Load Fuel Burn~27.6 gal/hr (104.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours