New Holland TK4050

The New Holland TK4050 is a tractor produced by New Holland. It is equipped with a 274.6 ci 4.5 L engine. The listed engine power is Diesel (gross): 93.9 hp / 70.0 kW. Transmission: 16 forward and 8 reverse. Drive type: crawler. Operating weight: 9193 to 9634 pounds.

Engine Power

Diesel (gross): 93.9 hp / 70.0 kW

Drive & Traction

crawler

Fuel & Capacities

29 gal 109.8 L

Transmission

16 forward and 8 reverse

Operating Weight

9193 to 9634 pounds

Overview

	2009 - 2017 TK4000 SeriesAgricultural Crawler tractor TK4000 Series Agricultural Crawler tractor

Production
Manufacturer	New Holland
Agricultural Crawler tractor
Built in Jesi, Italy

Variants
T4050	standard chassis
T4050F	narrow chassis
T4050V	ultra-narrow chassis
TK4050	crawler
TK4050M	mountain crawler (wide)

New Holland TK4050 Engine
FPT 4.5L 4-cyl diesel
Fuel tank	29 gal 109.8 L
Engine details ...

New Holland TK4050 Power
Engine (gross)	93.9 hp 70.0 kW
PTO (claimed)	83 hp 61.9 kW

Mechanical
Drive	crawler
Two-post mid-mount folding ROPS. Cab available.

Hydraulics
Type	open center
Pressure	2755 psi 190.0 bar
Valves	3 to 4
Pump flow	11.9 gpm 45.0 lpm
Total flow	17.7 gpm 67.0 lpm
Steering flow	5.8 gpm 22.0 lpm

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E
	540/1000

Dimensions & Tracks
Weight	9193 to 9634 pounds
13.8-inch tracks
Full dimensions and tracks ...

Electrical
Charging system	alternator
Charging amps	120
Battery CCA	800
Battery volts	12

References

New Holland TK4000 published in 2008
New Holland TK4000 published in 2010
New Holland TK4000 published in 2011

Engine

Engine Detail — 274.6 ci / 4.5 L Diesel

Manufacturer	FPT NEF
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	274.6 ci 4.5 L
Bore/Stroke	4.094x5.196 inches 104 x 132 mm
Emissions	Tier III
Rated Power (gross)	93.9 hp 70.0 kW
Rated RPM	2500
Torque	280.3 lb-ft 380.1 Nm
Torque RPM	1300
Starter	electric
Starter volts	12

Transmission

Transmission options
8-speed unsynchronized
16-speed creeper

Transmission — 8 forward and reverse unsynchronized

Type	unsynchronized
Gears	8 forward and reverse
Transmission
Type	creeper
Gears	16 forward and 8 reverse

Dimensions

New Holland TK4050 Tracks
Width	13.8 inches 35 cm
Width	12.2 inches 30 cm
TK4050M width	15.8 inches 40 cm

Dimensions
Length	131.5 inches 334 cm
Width	55.5 inches 140 cm
ROPS Weight	9193 lbs 4169 kg
Cab Weight	9634 lbs 4369 kg
Gauge	43.3 inches 109 cm

New Holland TK4050 Height
Steering wheel	40.9 inches 103 cm
ROPS	92.5 inches 234 cm
Cab	76.5 inches 194 cm

Photos

New Holland TK4050 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland TK4050 based on its 93.9 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TK4050.

Estimated Continuous Field Runtime: 5.9 hrs

Approximately 5.9 hours of continuous field operation at ~75% rated power on a full tank (29 gal / 109.8 L).

Estimated 75% Load Fuel Burn~4.9 gal/hr (18.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours