New Holland TL5060

The New Holland TL5060 is a tractor produced by New Holland. It is equipped with a 253.6 ci 4.2 L engine. The listed engine power is Diesel (listed): 100 hp / 74.6 kW. Transmission: Shuttle Command. Drive type: 4x2 2WD. Operating weight: 7022 to 8488 pounds.

Engine Power

Diesel (listed): 100 hp / 74.6 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

33.6 gal 127.2 L

Transmission

Shuttle Command

Operating Weight

7022 to 8488 pounds

Overview

	2007 - 2011 TL5000 SeriesUtility tractor TL5000 Series Utility tractor

Production
Manufacturer	New Holland
Utility tractor
Factories	Shanghai, China
	Tashkent, Uzbekistan

New Holland TL5060 Engine
Weifang-Deutz 4.2L 4-cyl diesel
Fuel tank	33.6 gal 127.2 L
Engine details ...

New Holland TL5060 Transmission
12-speed
Transmission details ...

New Holland TL5060 Power
Engine	100 hp 74.6 kW
PTO (claimed)	87.5 hp 65.2 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD (optional)
Steering	hydrostatic power
Hydraulic wet disc brakes
Open operator station. Optional ROPS. Optional cab with heat and air-conditioning.

Hydraulics
Valves	1 to 3
Pump flow	11.9 gpm 45.0 lpm

Tractor hitch
Rear Type	II
Rear lift (at ends)	7,368 lbs 3342 kg
Rear lift (at 24"/610mm)	4,497 lbs 2039 kg

Power Take-off (PTO)
Rear PTO Type	540
Engine RPM	540@2199

Dimensions & Tires
2WD Wheelbase	96 inches 243 cm
4WD Wheelbase	94.9 inches 241 cm
Weight	7022 to 8488 pounds
Front tire	7.50-16
Rear tire	16.9-34 (2WD)
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12
Battery AH	120

Engine

Engine Detail — 253.6 ci / 4.2 L Diesel

Manufacturer	Weifang-Deutz TD 226B-4
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	253.6 ci 4.2 L
Bore/Stroke	4.134x4.724 inches 105 x 120 mm
Emissions	Tier 1
Power	100 hp 74.6 kW
Fuel system	mechanical pump
Air cleaner	dry element
Rated RPM	2500
Torque	269.2 lb-ft 365.0 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission — Shuttle Command

Transmission	Shuttle Command
Gears	12 forward and reverse
Clutch	dual 305mm disc

Dimensions

New Holland TL5060 Tires
Standard tires (ag)	Front: 7.50-16. Rear: 16.9-34 (2WD)
	Front: 13.6-24. Rear: 16.9-34 (4WD)

Dimensions
2WD Wheelbase	96 inches 243 cm
4WD Wheelbase	94.9 inches 241 cm
Length	154.1 inches 391 cm
Height (exhaust)	100 inches 254 cm
2WD Clearance (front axle)	18.9 inches 48 cm
4WD Clearance (front axle)	17.7 inches 44 cm

New Holland TL5060 Weight
2WD	7,022 lbs 3185 kg
2WD cab	7,753 lbs 3516 kg
4WD	7,937 lbs 3600 kg
4WD cab	8,488 lbs 3850 kg

Photos

New Holland TL5060 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland TL5060 based on its 100 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TL5060.

Estimated Continuous Field Runtime: 6.5 hrs

Approximately 6.5 hours of continuous field operation at ~75% rated power on a full tank (33.6 gal / 127.2 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours