New Holland TN75A
The New Holland TN75A is a tractor produced by New Holland. It is equipped with a 179 ci 2.9 L engine. The rated power output is 72 hp 53.7 kW. Transmission: Synchro Command Plus. Operating weight: 5020 to 5810 pounds.
Engine Power
72 hp
53.7 kW
Fuel & Capacities
23 gal
87.1 L
Transmission
Synchro Command Plus
Operating Weight
5020 to 5810 pounds
New Holland TN75A Serial Number & Year Decoder
Find the exact manufacture year of your tractor by checking your chassis serial number below.
Where to Find the Serial NumberThe serial number plate is commonly located on the front frame, tractor transmission housing (right side), or instrument panel badge.
Overview
![]() | 2004 - 2008
TN-A SeriesUtility tractor |
|---|---|
2004 - 2008 | |
TN-A Series | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | New Holland |
Utility tractor | |
Built in Jesi, Italy | |
Variants | |
|---|---|
TN75A | ROPS |
TN75DA | cab |
TN75SA | SuperSteer |
TN75FA | narrow/orchard |
JX1075C | similar CaseIH model |
New Holland TN75A Engine | |
|---|---|
Iveco 2.9L 3-cyl diesel | |
Fuel tank | 23 gal
87.1 L |
Engine details ... | |
New Holland TN75A Power | |
|---|---|
Engine (gross) | 75 hp
55.9 kW |
Engine (net) | 72 hp
53.7 kW |
PTO (claimed) | 62 hp
46.2 kW |
Drawbar (tested) | 54.7 hp
40.8 kW |
PTO (tested) | 64.4 hp
48.0 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | mechanical rear |
Steering | hydrostatic power |
Differential wet disc brakes | |
ROPS. Canopy optional | |
Hydraulics | |
|---|---|
Type | open center |
Pressure | 2755 psi
190.0 bar |
Valves | 1 to 4 |
Pump flow | 16.9 gpm
64.0 lpm |
Steering flow | 7.4 gpm
28.0 lpm |
9.4 gpm (with power shuttle)
35.6 lpm | |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Rear lift (at 24"/610mm) | 3960 lbs
1796 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 (1.375) |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 81.5 inches
207 cm |
4WD Wheelbase | 78.9 inches
200 cm |
Weight | 5020 to 5810 pounds |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 65 |
Battery CCA | 730 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
TN-A Series Utility Tractors published in 2005, by New Holland | |
TN-A Series Utility Tractors published in 2006, by New Holland |
Engine
Engine Detail — 179 ci / 2.9 L Diesel
Manufacturer | Iveco |
Configuration | turbocharged diesel, 3-cylinder, liquid-cooled |
Displacement | 179 ci
2.9 L |
Bore/Stroke | 4.094x4.528 inches
104 x 115 mm |
Emissions | Tier 2 |
Power (net) | 72 hp
53.7 kW |
Power (gross) | 75 hp
55.9 kW |
Fuel use | 3.94 gal/hour
14.9 l/hour |
Air cleaner | dual paper elements |
Compression | 16.5:1 |
Rated RPM | 2300 |
Torque | 220 lb-ft
298.3 Nm |
Torque RPM | 1400 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
8-speed constant mesh with mechanical shuttle | |
12-speed partially synchronized with mechanical shuttle | |
16-speed partially synchronized with mechanical shuttle | |
16-speed partially synchronized with power shuttle |
Transmission — 8 forward and reverse constant mesh with mechanical shuttle
Type | constant mesh with mechanical shuttle |
Gears | 8 forward and reverse |
Clutch | 280mm dry cerametallic plate |
Left-hand synchronized mechanical shuttle requires clutching. | |
Transmission — Synchro Command
Transmission | Synchro Command |
Type | partially synchronized with mechanical shuttle |
Gears | 12 forward and reverse |
Clutch | 280mm dry cerametallic plate |
Four synchronized gears with three ranges. Left-hand synchronized mechanical shuttle requires clutching. | |
Transmission — Synchro Command Plus
Transmission | Synchro Command Plus |
Type | partially synchronized with mechanical shuttle |
Gears | 16 forward and reverse |
Clutch | 280mm dry cerametallic plate |
Left-hand synchronized mechanical shuttle requires clutching. | |
Transmission — Synchro Command Plus
Transmission | Synchro Command Plus |
Type | partially synchronized with power shuttle |
Gears | 16 forward and reverse |
Clutch | six 113mm wet organic discs |
Left-hand clutchless power shuttle. | |
Dimensions
New Holland TN75A Tires |
|---|
Dimensions | |
|---|---|
2WD Wheelbase | 81.5 inches
207 cm |
4WD Wheelbase | 78.9 inches
200 cm |
2WD Length | 153.3 inches
389 cm |
4WD Length | 151.6 inches
385 cm |
Width | 67.2 inches
170 cm |
Height (ROPS) | 95.1 inches
241 cm |
Height (Folded ROPS) | 75.1 inches
190 cm |
New Holland TN75A Weight | |
|---|---|
2WD Shipping | 5,020 lbs
2277 kg |
4WD Shipping | 5,415 lbs
2456 kg |
2WD Operating | 5,215 lbs
2365 kg |
4WD Operating | 5,810 lbs
2635 kg |
Ballasted | 7,055 lbs
3200 kg |
Tests
OCED Tractor Test 2130 | |
|---|---|
Diesel 16-speed 4WD
October 1, 2003 - April 1, 2004
Link: OCED Tractor Test 2130 file | |
PTO performance | |
Max power | 64.4 hp
48.0 kW |
Fuel use | 4.0 gal/hour
15.1 l/hour |
Power at rated engine speed | 63.6 hp
47.4 kW |
Fuel use | 3.9 gal/hour
14.8 l/hour |
Power at rated PTO speed | 63.6 hp
47.4 kW |
Fuel use | 3.9 gal/hour
14.8 l/hour |
Drawbar performance | |
Max power | 54.7 hp
40.8 kW |
Fuel use | 3.8 gal/hour
14.4 l/hour |
Gear 3M Lo used for power test. | |
Max pull | 6,135 lbs
2782 kg |
Gear 1M Hi used for pull test. | |
Photos
Related models
New Holland TN70
- Power:
- 69
- Production years:
- 2000 - 2003
New Holland 5030
- Power:
- 68.9
- Production years:
- 1992 - 1998
New Holland 5610
- Power:
- 68.5
- Production years:
- 1982 - 1993
New Holland TI4.65
- Power:
- 65.2
- Production years:
- 2014 - 2017
New Holland 4835
- Power:
- 65
- Production years:
- 1996 - 1999


