Roper YTH16
The Roper YTH16 is a tractor produced by Roper Lawn Tractors. It is equipped with a 658 cc 40.15 ci engine. The listed engine power is Gasoline (gross): 16 hp / 11.9 kW. Transmission: infinite forward and reverse.
Overview
 | 1986 - 1990
Lawn tractor |
|---|
Production | |
|---|---|
Manufacturer | Roper |
Lawn tractor | |
Built in Orangeburg, South Carolina, USA | |
Variants | |
|---|---|
YT16 | gear |
YTH16 | hydrostatic |
Roper YTH16 Engine | |
|---|---|
16HP Briggs & Stratton 658cc 2-cyl gasoline | |
Fuel tank | 3.5 gal
13.2 L |
Engine details ...  | |
Roper YTH16 Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
Mechanical | |
|---|---|
Two-wheel drive | |
Manual steering | |
Open operator station. |
Power Take-off (PTO) | |
|---|---|
Mid PTO | independent |
Clutch | electric |
Mid PTO Type | pulley |
Dimensions & Tires | |
|---|---|
Wheelbase | 44 inches
111 cm |
Front tire | 15x6-6 |
Rear tire | 20x10.00 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
YTH16 Yard Tractor published by Roper |
Engine
Engine Detail — 658 cc / 40.15 ci Gasoline
Manufacturer | Briggs & Stratton 402707 |
Fuel Type | Gasoline |
Configuration | 2-cylinder, air-cooled vertical-shaft |
Displacement | 658 cc
40.15 ci |
Bore/Stroke | 3.44x2.16 inches
87 x 55 mm |
Power (gross) | 16 hp
11.9 kW |
Starter | electric |
Starter volts | 12 |
Roper YTH16 Engine | |
|---|---|
 | |
Image courtesy of Shane Chappell |
Transmission
Transmission — infinite forward and reverse belt-driven hydrostatic
Type | belt-driven hydrostatic |
Gears | infinite forward and reverse |
Dimensions
Roper YTH16 Tires | |
|---|---|
Lawn/turf front | 15x6-6 |
Lawn/turf rear | 20x10.00 |
Dimensions | |
|---|---|
Wheelbase | 44 inches
111 cm |
Attachments
Attachment overview | |
|---|---|
44" mid-mount mower deck | |
Snowblower | |
Blade |
44" Mower deck | |
|---|---|
Type | mid-mount Roper |
3-blade with manual lift | |
Cutting width | 44 inches
111 cm |
Cut height | 1.2 to 4.5 inch
3 to 11 cm |
Photos
Roper YTH160BT yard tractor.
Roper YTH160BT yard tractor.
Roper YTH160BT yard tractor.
Recommended Implements & Sizing Guide
Engineering recommendations for Roper Lawn Tractors Roper YTH16 based on its 16 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Roper Lawn Tractors Roper YTH16.
Estimated Continuous Field Runtime: 4.2 hrs
Approximately 4.2 hours of continuous field operation at ~75% rated power on a full tank (3.5 gal / 13.2 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
Roper Lawn Tractors Roper YTH16 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Roper Lawn Tractors Roper YTH16.
Converted Equivalents:
Direct Competitor Comparison
Compare Roper YTH16 against same-era industry alternatives in the same horsepower class.
Roper YTH16
Related models
Roper lawn tractors T322
- Power:
- 13
- Production years:
- 1973 - 1977
Roper lawn tractors T323
- Power:
- 13
- Production years:
- 1974 - 1977
Roper lawn tractors T432
- Power:
- 14
- Production years:
- 1978 - 1983
Roper lawn tractors YT14
- Power:
- 14
- Production years:
- 1988 - 1988
Roper lawn tractors T622
- Power:
- 16
- Production years:
- 1973 - 1977