SAME Explorer3 110

The SAME Explorer3 110 is a tractor produced by Same. It is equipped with a 246.4 ci 4.0 L engine. The listed engine power is Diesel (gross): 109 hp / 81.3 kW. Transmission: Agroshift. Operating weight: 9039 lbs 4100 kg.

Engine Power

Diesel (gross): 109 hp / 81.3 kW

Fuel & Capacities

42.3 gal 160.1 L

Transmission

Agroshift

Operating Weight

9039 lbs 4100 kg

Overview

	2009 - 2012 Explorer3 SeriesUtility tractor Explorer3 Series Utility tractor

Production
Manufacturer	SAME
Utility tractor

SAME Explorer3 110 Engine
Deutz 4.0L 4-cyl diesel
Fuel tank	42.3 gal 160.1 L
Engine details ...

SAME Explorer3 110 Power
Engine (gross)	109 hp 81.3 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Hydraulic wet disc brakes
Trailer brakes	hydraulic OptOptional
	pneumatic OptOptional
Two-post ROPS. Available cab with air-conditioning.

Hydraulics
Pump flow	14.8 gpm 56.0 lpm

Tractor hitch
Rear lift	11684 lbs 5299 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540/1000
Front PTO	independent OptOptional
Clutch	electro-hydraulic wet disc
Front PTO Type	1000

Dimensions & Tires
Wheelbase	92.1 inches 233 cm
Weight	9039 lbs 4100 kg
Front tire	14.9R24
Rear tire	18.4R34
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

Explorer3 85-100-110 published in 2011, by SAME

Engine

Engine Detail — 246.4 ci / 4.0 L Diesel

Manufacturer	Deutz TD2012L04
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	246.4 ci 4.0 L
Bore/Stroke	3.98x4.96 inches 101 x 126 mm
Emissions	Stage III
Rated Power (gross)	109 hp 81.3 kW
Air cleaner	dry
Rated RPM	2100
Torque	395 lb-ft 535.6 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission options
15-speed partially synchronized
40-speed two-speed power shift

Transmission — 15 forward and reverse partially synchronized

Type	partially synchronized
Gears	15 forward and reverse
Five synchronized gears in three ranges. Optional creeper range provides 20 speeds.

Transmission — Agroshift

Transmission	Agroshift
Type	two-speed power shift
Gears	40 forward and reverse
Five synchronized gears in four ranges with two-speed power shift. Optional power shuttle.

Dimensions

SAME Explorer3 110 Tires
Standard tires (ag)	Front: 14.9R24. Rear: 18.4R34

Dimensions
Wheelbase	92.1 inches 233 cm
Length	157.1 inches 399 cm
Width	80.7 inches 204 cm
Height (ROPS)	109.8 inches 278 cm
Height (cab)	101.6 inches 258 cm
Weight	9039 lbs 4100 kg
Ground clearance	19.7 inches 50 cm
Front tread	63 to 82.7 inches 160 to 210 cm
Rear tread	63 to 82.7 inches 160 to 210 cm

Photos

SAME Explorer3 110 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Same Explorer3 110 based on its 109 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Same Explorer3 110.

Estimated Continuous Field Runtime: 7.5 hrs

Approximately 7.5 hours of continuous field operation at ~75% rated power on a full tank (42.3 gal / 160.1 L).

Estimated 75% Load Fuel Burn~5.7 gal/hr (21.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours