Schluter Super 750

The Schluter Super 750 is a tractor produced by Schluter. It is equipped with a 396.1 ci 6.5 L engine. The listed engine power is Engine Detail — 396.1 ci / 6.5 L (listed): 75 hp / 55.9 kW. Transmission: 12 forward and 6 reverse. Drive type: 4x2 2WD. Operating weight: 7,629 lbs (2WD) 3460 kg.

Engine Power

Engine Detail — 396.1 ci / 6.5 L (listed): 75 hp / 55.9 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

27.7 gal 104.8 L

Transmission

12 forward and 6 reverse

Operating Weight

7,629 lbs (2WD) 3460 kg

Overview

	1966 - 1969

Production
Manufacturer	Schluter

Schluter Super 750 Engine
6.5L 6-cyl
Fuel tank	27.7 gal 104.8 L
Engine details ...

Schluter Super 750 Transmission
12-speed
Transmission details ...

Schluter Super 750 Power
Engine	75 hp 55.9 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD optional
Steering	mechanical/power assist
Drum brakes

Hydraulics
Total flow	6.9 gpm 26.1 lpm

Tractor hitch
Rear lift	5843 lbs 2650 kg
	6,174 lbs (optional) 2800 kg

Power Take-off (PTO)
Rear PTO Type	540/975

Dimensions & Tires
Wheelbase	103.5 inches 262 cm
Weight	7629 to 8754 pounds
Front tire	6.50-20
Rear tire	13.6-36
Full dimensions and tires ...

Engine

Engine Detail — 396.1 ci / 6.5 L

Manufacturer	SD 105 W 6
Configuration	6-cylinder
Displacement	396.1 ci 6.5 L
Bore/Stroke	4.134x4.921 inches 105 x 125 mm
Power	75 hp 55.9 kW
Rated RPM	1800
Torque	239.0 lb-ft 324.1 Nm
Torque RPM	1300

Transmission

Transmission — 12 forward and 6 reverse

Gears

12 forward and 6 reverse

Dimensions

Schluter Super 750 Tires
Ag front	6.50-20 (2WD)
	11.2-24 (4WD)
Ag rear	13.6-36

Dimensions
Wheelbase	103.5 inches 262 cm
Length	170.9 inches 434 cm
Height	98.4 inches 249 cm
Weight	7,629 lbs (2WD) 3460 kg
	8,754 lbs (4WD) 3970 kg

Photos

Schluter Super 750 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Schluter Super 750 based on its 75 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Schluter Super 750.

Estimated Continuous Field Runtime: 7.1 hrs

Approximately 7.1 hours of continuous field operation at ~75% rated power on a full tank (27.7 gal / 104.9 L).

Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours