Shibaura SE4000
The Shibaura SE4000 is a tractor produced by Shibaura. It is equipped with a 130.2 ci 2.1 L engine. The listed engine power is Diesel (listed): 40 hp / 29.8 kW. Transmission: 12 forward and 4 reverse. Operating weight: 3075 lbs 1394 kg.
Engine Power
Diesel (listed): 40 hp / 29.8 kW
Fuel & Capacities
9.25 gal
35.0 L
Transmission
12 forward and 4 reverse
Operating Weight
3075 lbs
1394 kg
Overview
 | Compact Utility tractor | Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Shibaura |
Compact Utility tractor | |
Variants | |
|---|---|
SE4000 | 2WD |
SE4040 | 4WD |
Shibaura SE4000 Engine | |
|---|---|
Shibaura 2.1L 4-cyl diesel | |
Engine details ...  |
Shibaura SE4000 Transmission | |
|---|---|
12-speed gear | |
Transmission details ...  |
Shibaura SE4000 Power | |
|---|---|
Engine | 40 hp
29.8 kW |
Drawbar (claimed) | 32.8 hp
24.5 kW |
PTO (claimed) | 36 hp
26.8 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Mechanical drum brakes | |
Open operator station. ROPS available. |
Capacity | |
|---|---|
Fuel | 9.25 gal
35.0 L |
Hydraulic system | 9.25 gal
35.0 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 9.25 gal
35.0 L |
Pressure | 2133 psi
147.1 bar |
Valves | 1 |
Pump flow | 5.3 gpm
20.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position and draft control |
Rear lift (at ends) | 2524 lbs
1144 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | live |
Rear PTO Type | 540 (1.375) |
Engine RPM | 546@2500 |
701@2500 | |
1042@2500 | |
1329@2500 | |
Dimensions & Tires | |
|---|---|
Weight | 3075 lbs
1394 kg |
Front tire | 6.00x16 |
Rear tire | 12.4x28 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 130.2 ci / 2.1 L Diesel
Manufacturer | Shibaura LEP854A |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 130.2 ci
2.1 L |
Bore/Stroke | 3.35x3.70 inches
85 x 94 mm |
Power | 40 hp
29.8 kW |
Compression | 22.1:1 |
Rated RPM | 2500 |
Torque | 89.7 lb-ft
121.6 Nm |
Torque RPM | 2000 |
Starter volts | 12 |
Transmission
Transmission — 12 forward and 4 reverse gear
Type | gear |
Gears | 12 forward and 4 reverse |
Dimensions
Shibaura SE4000 Tires | |
|---|---|
Ag front | 6.00x16 |
Ag rear | 12.4x28 |
Dimensions | |
|---|---|
Length | 131.5 inches
334 cm |
Width | 59.8 inches
151 cm |
Height (steering wheel) | 61.8 inches
156 cm |
Weight | 3075 lbs
1394 kg |
Max weight | 7430 lbs
3370 kg |
Ground clearance | 15.6 inches
39 cm |
Front tread | 44.5 to 54.5 inches
113 to 138 cm |
Rear tread | 47.2 to 59.1 inches
119 to 150 cm |
Photos
Shibaura SE4000
Shibaura SE4000
Recommended Implements & Sizing Guide
Engineering recommendations for Shibaura SE4000 based on its 40 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Shibaura SE4000.
Estimated Continuous Field Runtime: 4.5 hrs
Approximately 4.5 hours of continuous field operation at ~75% rated power on a full tank (9.3 gal / 35 L).
Estimated 75% Load Fuel Burn~2.1 gal/hr (7.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Shibaura SE4000 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Shibaura SE4000.
Converted Equivalents:
Horsepower (HP)40 hp
Kilowatts (kW)29.8 kW
Metric Horsepower (PS / CV)40.6 PS
Direct Competitor Comparison
Compare Shibaura SE4000 against same-era industry alternatives in the same horsepower class.
Current Model
Shibaura
Shibaura SE4000
Engine Power:Diesel (listed): 40 hp / 29.8 kW
★ Baseline Reference
Related models
Shibaura SD3203
- Power:
- 32
- Production years:
- 1980 - 1985
Shibaura SD3243
- Power:
- 32
- Production years:
- 1980 - 1985
Shibaura ST333
- Power:
- 33
- Production years:
- 2016 - 2026
Shibaura S435
- Power:
- 38
Shibaura SD4000
- Power:
- 38.9
- Production years:
- 1977 - 1980