Snapper GT1848H
The Snapper GT1848H is a tractor produced by Snapper Lawn Tractors. It is equipped with a 624 cc 38.1 ci engine. The listed engine power is Gasoline (gross): 18 hp / 13.4 kW. Transmission: Eaton 11. Operating weight: 704 lbs 319 kg.
Engine Power
Gasoline (gross): 18 hp / 13.4 kW
Fuel & Capacities
5 gal
18.9 L
Transmission
Eaton 11
Operating Weight
704 lbs
319 kg
Overview
 | 1995 - 1997
Garden tractorPower King built
Garden tractor
Power King built |
|---|
Production | |
|---|---|
Distributor | Snapper |
Manufacturer | Power King |
Garden tractor | |
Built in Beaver Dam, Wisconsin, USA | |
The Snapper GT1848H is the same as the Power King 1218HV. | |
Snapper GT1848H Engine | |
|---|---|
18HP Kohler 624cc 2-cyl gasoline | |
Fuel tank | 5 gal
18.9 L |
Engine details ...  | |
Snapper GT1848H Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
Mechanical | |
|---|---|
Two-wheel drive | |
Manual steering | |
Disc brakes | |
Open operator station. |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 2000 OptOptional |
Front PTO | independent |
Clutch | electric |
Dimensions & Tires | |
|---|---|
Wheelbase | 48 inches
121 cm |
Weight | 704 lbs
319 kg |
Front tire | 16x6.50-8 |
Rear tire | 23x10.50-12 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | flywheel alternator |
Charging amps | 15 |
Battery CCA | 300 |
Battery volts | 12 |
References | |
|---|---|
 | |
Snapper GT1848H published in 1995 | |
Legendary Quality published in 1997, by Snapper |
Engine
Engine Detail — 624 cc / 38.1 ci Gasoline
Manufacturer | Kohler CH18 |
Fuel Type | Gasoline |
Configuration | 2-cylinder, air-cooled horizontal-shaft V-Twin |
Displacement | 624 cc
38.1 ci |
Bore/Stroke | 3.03x2.64 inches
77 x 67 mm |
Power (gross) | 18 hp
13.4 kW |
Starter | electric |
Starter volts | 12 |
Oil capacity | 2 qts
1.9 L |
Transmission
Transmission — Eaton 11
Transmission | Eaton 11 |
Type | shaft-driven hydrostatic |
Gears | infinite forward and reverse (2-range) |
Eaton 11 hydrostatic transmission with a Peerless 2500 two-speed transaxle. | |
 | |
Dimensions
Snapper GT1848H Tires | |
|---|---|
Lawn/turf front | 16x6.50-8 |
Lawn/turf rear | 23x10.50-12 |
Dimensions | |
|---|---|
Wheelbase | 48 inches
121 cm |
Length | 68 inches
172 cm |
Width | 41 inches
104 cm |
Height (steering wheel) | 42.5 inches
107 cm |
Weight | 704 lbs
319 kg |
Ground clearance | 8.5 inches
21 cm |
Attachments
Attachment overview | |
|---|---|
48" mid-mount mower deck | |
Snowblower | |
Blade | |
Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments. |
48" Mower deck | |
|---|---|
Type | mid-mount Snapper |
3-blade | |
Cutting width | 48 inches
121 cm |
Photos
Snapper GT1848H
Recommended Implements & Sizing Guide
Engineering recommendations for Snapper Lawn Tractors Snapper GT1848H based on its 18 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Snapper Lawn Tractors Snapper GT1848H.
Estimated Continuous Field Runtime: 5.3 hrs
Approximately 5.3 hours of continuous field operation at ~75% rated power on a full tank (5 gal / 18.9 L).
Estimated 75% Load Fuel Burn~0.9 gal/hr (3.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Snapper Lawn Tractors Snapper GT1848H Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Snapper Lawn Tractors Snapper GT1848H.
Converted Equivalents:
Horsepower (HP)18 hp
Kilowatts (kW)13.4 kW
Metric Horsepower (PS / CV)18.2 PS
Direct Competitor Comparison
Compare Snapper GT1848H against same-era industry alternatives in the same horsepower class.
Current Model
Snapper Lawn Tractors
Snapper GT1848H
Engine Power:Gasoline (gross): 18 hp / 13.4 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester Type A 15HP
Engine Power:16.7
Production Years:1908 - 1911
Related models
Snapper lawn tractors 3314522BVE
- Power:
- 14.5
- Production years:
- 2003 - 2003
Snapper lawn tractors 381451HBVE
- Power:
- 14.5
- Production years:
- 2003 - 2003
Snapper lawn tractors LT145H33HBV
- Power:
- 14.5
- Production years:
- 2002 - 2002
Snapper lawn tractors LT145H38DBV
- Power:
- 14.5
- Production years:
- 1997 - 1999
Snapper lawn tractors LT145H38HBV
- Power:
- 14.5
- Production years:
- 2002 - 2002