Snapper RE210
The Snapper RE210 is a tractor produced by Snapper Lawn Tractors. It is equipped with a 499 cc 30.5 ci engine. The listed engine power is Gasoline (gross): 15.5 hp / 11.6 kW. Transmission: Hydro-Gear T2.
Overview
![]() | 2013 - 2018
Riding lawn mower |
|---|
Production | |
|---|---|
Manufacturer | Snapper (a part of Briggs & Stratton) |
Riding lawn mower | |
Original price was $2,099 in 2014 | |
Snapper RE210 Engine | |
|---|---|
15.5HP Briggs and Stratton 499cc 1-cyl gasoline | |
Fuel tank | 2 gal
7.6 L |
Engine details ... | |
Snapper RE210 Transmission | |
|---|---|
hydrostatic | |
Transmission details ... |
Mechanical | |
|---|---|
Two-wheel drive | |
Steering | manual |
Open operator station. | |
Power Take-off (PTO) | |
|---|---|
Mid PTO | independent |
Clutch | mechanical |
Dimensions & Tires | |
|---|---|
Front tire | 13x5-6 |
Rear tire | 16x6.5-8 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery CCA | 190 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Product Catalog published in 2013, by Snapper |
Engine
Engine Detail — 499 cc / 30.5 ci Gasoline
Manufacturer | Briggs and Stratton 31S777 |
Fuel Type | Gasoline |
Configuration | 1-cylinder, air-cooled vertical-shaft |
Displacement | 499 cc
30.5 ci |
Bore/Stroke | 3.56x3.06 inches
90 x 78 mm |
Power (gross) | 15.5 hp
11.6 kW |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — Hydro-Gear T2
Transmission | Hydro-Gear T2 |
Type | belt-driven hydrostatic |
Gears | infinite forward and reverse |
![]() | |
Dimensions
Snapper RE210 Tires | |
|---|---|
Lawn/turf front | 13x5-6 |
Lawn/turf rear | 16x6.5-8 |
Dimensions | |
|---|---|
Length | 68 inches
172 cm |
Width | 37 inches
93 cm |
Height | 43 inches
109 cm |
Front axle | Steel |
Attachments
33" Mower deck | |
|---|---|
Type | mid-mount Snapper |
1-blade with manual lift | |
Cutting width | 33 inches
83 cm |
Cut height | 1.5 to 4 inch
3 to 10 cm |
Cut positions | 6 |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Snapper Lawn Tractors Snapper RE210 based on its 15.5 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Snapper Lawn Tractors Snapper RE210.
Estimated Continuous Field Runtime: 2.5 hrs
Approximately 2.5 hours of continuous field operation at ~75% rated power on a full tank (2 gal / 7.6 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
Snapper Lawn Tractors Snapper RE210 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Snapper Lawn Tractors Snapper RE210.
Converted Equivalents:
Direct Competitor Comparison
Compare Snapper RE210 against same-era industry alternatives in the same horsepower class.
Snapper RE210
International Harvester D-214
Related models
Snapper lawn tractors LT12
- Power:
- 12.5
- Production years:
- 1986 - 1988
Snapper lawn tractors LT125B33AB
- Power:
- 12.5
- Production years:
- 1994 - 1994
Snapper lawn tractors LT125G33BB
- Power:
- 12.5
- Production years:
- 1995 - 1996
Snapper lawn tractors LT125G38DB
- Power:
- 12.5
- Production years:
- 1997 - 1997
Snapper lawn tractors YT12
- Power:
- 12.5
- Production years:
- 1989 - 1990



