Snapper SPX 2042
The Snapper SPX 2042 is a tractor produced by Snapper Lawn Tractors. It is equipped with a 540 cc 33 ci engine. The listed engine power is Gasoline (gross): 20 hp / 14.9 kW. Transmission: Hydro-Gear T2.
Engine Power
Gasoline (gross): 20 hp / 14.9 kW
Fuel & Capacities
3.5 gal
13.2 L
Transmission
Hydro-Gear T2
Overview
 | 2012 - 2013
SPX SeriesLawn tractor
SPX Series
Lawn tractor |
|---|
Production | |
|---|---|
Manufacturer | Snapper (a part of Briggs & Stratton) |
Lawn tractor | |
Original price was $1,799 in 2012 | |
Snapper SPX 2042 Engine | |
|---|---|
20HP Briggs & Stratton 540cc 1-cyl gasoline | |
Fuel tank | 3.5 gal
13.2 L |
Engine details ...  | |
Snapper SPX 2042 Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
Mechanical | |
|---|---|
Two-wheel drive | |
Steering | manual |
Open operator station. | |
Power Take-off (PTO) | |
|---|---|
Front PTO | independent |
Clutch | electric |
Dimensions & Tires | |
|---|---|
Wheelbase | 50 inches
127 cm |
Front tire | 15x6-6 |
Rear tire | 20x8.0-8 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery CCA | 230 |
Battery volts | 12 |
References | |
|---|---|
 | |
Product Catalog published in 2013, by Snapper |
Engine
Engine Detail — 540 cc / 33 ci Gasoline
Manufacturer | Briggs & Stratton 33M677 |
Fuel Type | Gasoline |
Configuration | 1-cylinder, air-cooled vertical-shaft |
Displacement | 540 cc
33 ci |
Bore/Stroke | 3.70x3.06 inches
94 x 78 mm |
Power (gross) | 20 hp
14.9 kW |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — Hydro-Gear T2
Transmission | Hydro-Gear T2 |
Type | belt-driven hydrostatic |
Gears | infinite forward and reverse |
 | |
Dimensions
Snapper SPX 2042 Tires | |
|---|---|
Lawn/turf front | 15x6-6 |
Lawn/turf rear | 20x8.0-8 |
Dimensions | |
|---|---|
Wheelbase | 50 inches
127 cm |
Length | 71 inches
180 cm |
Width | 52 inches
132 cm |
Height | 45 inches
114 cm |
Front axle | Cast iron |
Attachments
42" Mower deck | |
|---|---|
Type | mid-mount Snapper |
2-blade with manual lift | |
Cutting width | 42 inches
106 cm |
Cut height | 1.5 to 4 inch
3 to 10 cm |
Cut positions | 7 |
Recommended Implements & Sizing Guide
Engineering recommendations for Snapper Lawn Tractors Snapper SPX 2042 based on its 20 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Snapper Lawn Tractors Snapper SPX 2042.
Estimated Continuous Field Runtime: 3.4 hrs
Approximately 3.4 hours of continuous field operation at ~75% rated power on a full tank (3.5 gal / 13.2 L).
Estimated 75% Load Fuel Burn~1 gal/hr (3.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Snapper Lawn Tractors Snapper SPX 2042 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Snapper Lawn Tractors Snapper SPX 2042.
Converted Equivalents:
Horsepower (HP)20 hp
Kilowatts (kW)14.9 kW
Metric Horsepower (PS / CV)20.3 PS
Direct Competitor Comparison
Compare Snapper SPX 2042 against same-era industry alternatives in the same horsepower class.
Current Model
Snapper Lawn Tractors
Snapper SPX 2042
Engine Power:Gasoline (gross): 20 hp / 14.9 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 184 Lo-Boy
Engine Power:18
Production Years:1977 - 1980
Related models
Snapper lawn tractors 1600
- Power:
- 16
- Production years:
- 1979 - 1984
Snapper lawn tractors 1650
- Power:
- 16
- Production years:
- 1979 - 1984
Snapper lawn tractors 421614
- Power:
- 16
- Production years:
- 1995 - 1995
Snapper lawn tractors 421616BVE
- Power:
- 16
- Production years:
- 1997 - 1998
Snapper lawn tractors 421620BVE
- Power:
- 16
- Production years:
- 2003 - 2003