Snapper UGT2260H
The Snapper UGT2260H is a tractor produced by Snapper Lawn Tractors. It is equipped with a 624 cc 38.1 ci engine. The listed engine power is Gasoline (gross): 22 hp / 16.4 kW. Transmission: KYB. Operating weight: 1200 lbs 544 kg.
Engine Power
Gasoline (gross): 22 hp / 16.4 kW
Fuel & Capacities
8.25 gal
31.2 L
Transmission
KYB
Operating Weight
1200 lbs
544 kg
Overview
 | 1998
Garden tractorPower King built
Garden tractor
Power King built |
|---|
Production | |
|---|---|
Distributor | Snapper |
Manufacturer | Power King |
Garden tractor | |
Built in Beaver Dam, Wisconsin, USA | |
Snapper UGT2260H Engine | |
|---|---|
22HP Kohler 624cc 2-cyl gasoline | |
Fuel tank | 8.25 gal
31.2 L |
Engine details ...  | |
Snapper UGT2260H Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
Mechanical | |
|---|---|
Two-wheel drive | |
Final drives | spur bull gear |
Steering | hydrostatic power |
Mechanical band brakes | |
Open operator station. | |
Tractor hitch | |
|---|---|
Rear Type | 0 OptOptional |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent OptOptional |
Rear PTO Type | 2000 |
Front PTO | independent |
Clutch | electric |
Dimensions & Tires | |
|---|---|
Wheelbase | 57 inches
144 cm |
Weight | 1200 lbs
544 kg |
Front tire | 8-10 |
Rear tire | 8.0-16 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | flywheel alternator |
Charging amps | 15 |
Battery volts | 12 |
Battery AH | 45 |
References | |
|---|---|
 | |
Snapper Garden Tractors published in 1997 |
Engine
Engine Detail — 624 cc / 38.1 ci Gasoline
Manufacturer | Kohler CH22 |
Fuel Type | Gasoline |
Configuration | 2-cylinder, air-cooled horizontal-shaft V-Twin |
Displacement | 624 cc
38.1 ci |
Bore/Stroke | 3.03x2.64 inches
77 x 67 mm |
Power (gross) | 22 hp
16.4 kW |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — KYB
Transmission | KYB |
Type | shaft-driven hydrostatic |
Gears | infinite forward and reverse |
 | |
Dimensions
Snapper UGT2260H Tires | |
|---|---|
Ag front | 4.0-12 |
Ag rear | 8.0-16 |
8.3-16 | |
Lawn/turf front | 8-10 |
Lawn/turf rear | 8.0-16 |
13.5-15 | |
Dimensions | |
|---|---|
Wheelbase | 57 inches
144 cm |
Length | 83 inches
210 cm |
Width | 44 inches
111 cm |
Height (steering wheel) | 50 inches
127 cm |
Weight | 1200 lbs
544 kg |
Attachments
Attachment overview | |
|---|---|
48" mid-mount mower deck | |
60" mid-mount mower deck | |
Snowblower | |
Blade | |
Front-end loader | |
Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments. |
Photos
Snapper UGT2260H tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Snapper Lawn Tractors Snapper UGT2260H based on its 22 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Snapper Lawn Tractors Snapper UGT2260H.
Estimated Continuous Field Runtime: 7.3 hrs
Approximately 7.3 hours of continuous field operation at ~75% rated power on a full tank (8.3 gal / 31.2 L).
Estimated 75% Load Fuel Burn~1.1 gal/hr (4.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Snapper Lawn Tractors Snapper UGT2260H Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Snapper Lawn Tractors Snapper UGT2260H.
Converted Equivalents:
Horsepower (HP)22 hp
Kilowatts (kW)16.4 kW
Metric Horsepower (PS / CV)22.3 PS
Direct Competitor Comparison
Compare Snapper UGT2260H against same-era industry alternatives in the same horsepower class.
Current Model
Snapper Lawn Tractors
Snapper UGT2260H
Engine Power:Gasoline (gross): 22 hp / 16.4 kW
★ Baseline Reference
Related models
Snapper lawn tractors 1855
- Power:
- 18
- Production years:
- 1979 - 1984
Snapper lawn tractors 2000GX
- Power:
- 18
- Production years:
- 1992 - 1998
Snapper lawn tractors 421823BVE
- Power:
- 18
- Production years:
- 2003 - 2003
Snapper lawn tractors GT1848H
- Power:
- 18
- Production years:
- 1995 - 1997
Snapper lawn tractors HYT18
- Power:
- 18
- Production years:
- 1989 - 1989