Valmet 1502
The Valmet 1502 is a tractor produced by Valmet. It is equipped with a 405 ci 6.6 L engine. The listed engine power is Diesel (listed): 136 hp / 101.4 kW. Transmission: 16 forward and 4 reverse. Drive type: 4x2 2WD. Operating weight: 16,470 lbs 7470 kg.
Engine Power
Diesel (listed): 136 hp / 101.4 kW
Drive & Traction
4x2 2WD
Fuel & Capacities
47.55 gal
180.0 L
Transmission
16 forward and 4 reverse
Operating Weight
16,470 lbs
7470 kg
Overview
 | 1975 - 1980
Four-wheel Drive (4WD) tractor |
|---|
Production | |
|---|---|
Manufacturer | Valmet |
Four-wheel Drive (4WD) tractor | |
Valmet 1502 Engine | |
|---|---|
Valmet 6.6L 6-cyl diesel | |
Fuel tank | 47.55 gal
180.0 L |
Engine details ...  | |
Valmet 1502 Transmission | |
|---|---|
16-speed | |
Transmission details ...  |
Valmet 1502 Power | |
|---|---|
Engine | 136 hp
101.4 kW |
Mechanical | |
|---|---|
Drive | 4x2 2WD |
6x4 4WD (after 1979) | |
Power steering | |
Cab standard. | |
Hydraulics | |
|---|---|
Pump flow | 6.9 gpm
26.1 lpm |
Tractor hitch | |
|---|---|
Rear lift | 7,716 lbs
3499 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540,1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 99.21 inches
251 cm |
Weight | 15210 to 16470 pounds |
Front tire | 18-22.5 |
Rear tire | 18-22.5 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 405 ci / 6.6 L Diesel
Manufacturer | Valmet 611 CS |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 405 ci
6.6 L |
Bore/Stroke | 4.252x4.724 inches
108 x 120 mm |
Power | 136 hp
101.4 kW |
Rated RPM | 2300 |
Torque | 405 lb-ft
549.2 Nm |
Torque RPM | 1650 |
Transmission
Transmission — 16 forward and 4 reverse
Gears | 16 forward and 4 reverse |
Dimensions
Valmet 1502 Tires | |
|---|---|
Ag front | 18-22.5 |
13.6-24 (4WD) | |
Ag rear | 18-22.5 |
13.6-24 (4WD) | |
Dimensions | |
|---|---|
Wheelbase | 99.21 inches
251 cm |
Length | 209.8 inches
532 cm |
Height | 117.7 inches
298 cm |
Weight | 16,470 lbs
7470 kg |
15,210 lbs (after 1979)
6899 kg | |
Photos
Valmet 1502 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 1502 based on its 136 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 1502.
Estimated Continuous Field Runtime: 6.7 hrs
Approximately 6.7 hours of continuous field operation at ~75% rated power on a full tank (47.5 gal / 180 L).
Estimated 75% Load Fuel Burn~7.1 gal/hr (26.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 1502 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 1502.
Converted Equivalents:
Horsepower (HP)136 hp
Kilowatts (kW)101.4 kW
Metric Horsepower (PS / CV)137.9 PS
Direct Competitor Comparison
Compare Valmet 1502 against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 1502
Engine Power:Diesel (listed): 136 hp / 101.4 kW
★ Baseline Reference
Related models
Valmet 1203
- Power:
- 110
- Production years:
- 1980 - 1983
Valmet 6800
- Power:
- 114
- Production years:
- 1996 - 2001
Valmet 1102
- Power:
- 115
- Production years:
- 1973 - 1980
Valmet 6850
- Power:
- 118
- Production years:
- 1998 - 2003
Valmet 8100
- Power:
- 118
- Production years:
- 1990 - 1996